Filter
Top Products
RQTX0051
5
Setup
ENGLISH
∫ To use your existing Panasonic wireless accessories together with your SH-FX85
You can use your existing Panasonic wireless accessories (not included) together with your SH-FX85 on the same home theater system.
e.g. Preparation
≥Make sure to connect the AC power supply cords of your wireless accessories.
≥Turn on the home theater unit and reduce the volume.
1 Turn on the wireless accessories.
2 While pressing [5/9] on the home theater unit,
press the numbered button [3] on the remote control until “P” lights in the home
theater unit’s display.
3 While “P” is displayed, press [I/D SET] on the rear of each of your wireless
accessories.
≥If “P” goes off before you press [I/D SET], repeat step 2 and then continue the
procedure.
4 While pressing [5/9] on the home theater unit,
press the numbered button [3] on the remote control.
5 Turn off and on your wireless accessories.
≥
The corresponding wireless link indicators (
“ [W1] ”, “ [W2] ”, or “ [WS] ”)
light on the
home theater unit.
[Note[
≥If you should change the transmitter card, repeat the above steps to pair each of
your wireless accessories with it.
≥You cannot use the wireless sound system with SH-FX65T transmitter card.
SB-FX85
Home theater unit
Additional SB-FX85
Wireless accessories (Keep the transmitter cards of these accessories.)
Wireless system
Wireless subwoofer
Pairing is necessary.
Use only the SH-FX85T transmitter card.
The SB-FX85 wireless sound system is originally paired to work with the SH-FX85T
transmitter card that comes along with it. For any other accessories to work with the
SH-FX85T transmitter card in use, pairing is necessary.
e.g. After pairing
I/D SET
Use a pointed object.
RQTX_FX85_En.fm Page 5 Wednesday, January 3, 2007 11:18 AM