Filter
Top Products
1
9
Cassette Deck/VCR Features
You can connect two cassette decks to the receiver. Selecting either
VCR/TAPE 1
or
TAPE 2 MONITOR
lets you hear the playback from the cassette deck you con-
nected to the receiver’s corresponding (
VCR/TAPE 1
or
TAPE 2 MONITOR
) jacks.
Using the VCR/TAPE 1 and
TAPE 2 MONITOR Buttons
Press
VCR/TAPE 1
.
VCR
appears on the display. You hear the playback from the
cassette deck or VCR you connected to the receiver’s
VCR/TAPE 1 IN
jacks.
Press
TAPE 2 MONITOR
.
TAPE 2
appears on the display along with the last pro-
gram source you selected. You can hear playback or monitor a recording from
the cassette deck you connected to the receiver’s
TAPE 2 MONITOR
jacks. The
TAPE 2 MONITOR REC
jacks continue to output sound from the previously selected
source after you press
TAPE 2 MONITOR
.
To return to the previous source, press
TAPE 2 MONITOR
again so
TAPE
2
disap-
pears.
Notes:
• If you press
TAPE 2 MONITOR
when that cassette deck is neither playing nor
recording, the receiver mutes the current audio source. To hear the audio
source, press
TAPE 2 MONITOR
so
TAPE
2
disappears from the display.
• Do not press
TAPE 2 MONITOR
while you are recording on the deck con-
nected to
TAPE 2 MONITOR REC
. If you do, the recording is interrupted for
about 1 second.
Monitoring a
Program Source
The receiver sends the audio of the program source you select—
VCR/TAPE 1
,
DVD/LD
,
CD
,
FM/AM
(tuner), or
PHONO
—to the
VCR/TAPE 1
OUT/REC
(audio) and
TAPE 2 MONITOR OUT/REC
jacks. If you select
VCR/TAPE 1
or
DVD/LD
, the video pro-
gram is also sent to the
VIDEO OUT TO MONITOR TV
jack.
The
VOLUME
control does not affect the level of the signal going to the tape
decks.
Dubbing a Cassette Tape
You can copy (dub) a cassette tape from one cassette deck to another through
the STAV-3770.
You can use either deck as the playback or recording deck. However, if you
want to monitor the cassette deck during dubbing, use the deck connected to
the
VCR/TAPE 1
jacks as the source, and the deck you connected to the
TAPE 2
REC
jacks as the recording deck. Then press
TAPE 2 MONITOR
so
TAPE
2
and the
last program source you selected appear on the display. See “Using the VCR/
TAPE 1 and TAPE 2 MONITOR Buttons.”
The
VOLUME
control does not affect the level of the signal going to the tape
decks.