Filter
Top Products
10
Setup
10
RQTX0170
Setup
By using 2 sets of SH-FX70, you can enjoy 7.1-channel playback, making
the surround speakers and surround back speakers wireless (B 7).
≥Keep the digital transmitter of the additional wireless system for later
use.
Preparation
≥Make sure to connect the AC power supply cord of the additional
wireless system.
≥Turn on the home theater unit and reduce the volume.
[Note]
≥If you should change the digital transmitter, repeat the pairing steps for
both units of the wireless system, one unit at a time.
≥You cannot use the wireless system with SH-FX65T or SH-FX67T
digital transmitter.
Using the surround back speakers
Use only the SH-TR70 digital transmitter.
Wireless system is originally paired to work with the SH-TR70
digital transmitter that comes along with it. For any other
accessories to work with the SH-TR70 digital transmitter in use,
pairing is necessary.
Pairing is necessary.
Wireless system
Home theater unit
Additional wireless system
e.g. After pairing
1 Turn on the additional wireless system.
2 While pressing the skip and slow-search button (e.g. [5/9]) on
the home theater unit, press the numbered button [3] on the remote
control until “P” lights in the home theater unit’s display.
3 While “P” is displayed, press
[I/D SET] on the rear of the
additional wireless system.
≥The indicator on the additional
system turns green.
≥If “P” goes off before you press
[I/D SET], repeat step 2 and
then continue the procedure.
4 While pressing [5/9] on the home theater unit, press the
numbered button [3] on the remote control.
5 Turn off and on the additional wireless system.
≥Make sure the indicator on the additional wireless system lights up
green.
Use a pointed object.
SH-FX70_RQTX0170-Y_En.book Page 10 Wednesday, March 4, 2009 3:15 PM