Filter
Top Products
VQT2R70
6
Control guide
Before use
Control guide
Speaker (with built-in amplifi er)
AC IN
㨪
TEST
ID
Pole
(mid-high part)
Base
(woofer part)
AC inlet
(
➜
page 12)
TEST
terminal
[WIRELESS LINK]
indicator
(
➜
page 13)
ID switch
For switching the speaker
“ON/OFF” (
➜
page 13)
Front view
Side view
Note
TEST terminal: This is used to check the product operation status. Only used in factory. Do not insert a foreign object.
ID switch: This is used to check the product operation status and not used regularly.
Note
The audio output terminals can be used when you do not use the wireless function and play back on other speakers via an external
amplifi er. Use commercially available monaural audio cables (monaural mini plug/pin plug) to connect to audio input terminals of an
external amplifi er channel by channel.
Rear view
AC inlet (
➜
page 12)
Subwoofer output
terminal (
➜
page 12)
Digital audio input terminal (
➜
pages 9 to 11, 19)
HDMI terminal (
➜
pages 9, 10, 12, 19)Audio input terminal
(
➜
pages 9 to 12)
Audio output terminal
(
➜
below)
Saving energy
This system is designed to conserve its power consumption and save energy.
• This system is automatically turned off when no signal is input and no operation is
performed for approx. 30 minutes.
5%<6228364'PKPFF5%<6228364'PKPFF ඦ೨ඦ೨