Filter
Top Products
9
RQT9682
Getting Started
Quick Start Guide
You can select desired source, change the settings, access playback/
menus, etc., by using the START menu.
When “Input Selection” is selected
You can select a desired source from the menu.
≥DVD/CD (B 11), FM RADIO (B 8), AUX/TV (B below),
USB
(B 13)
When “Setup”
is selected
You can change the settings for this unit. (B 13)
Other selectable items
The items that are displayed will vary depending on the media and
source.
When a disc is loaded or an USB device is connected, you can also
access playback or menus from the START menu.
e.g. [DVD-V]
When the on-screen control panel appears
e.g. [DVD-V] (when “Playback Disc” is selected from the START menu)
You can operate the playback with the indicated controls.
Confirm the audio connection to the AUX/TV terminal on the main unit when
you select “AUX/TV”
(B 7). Reduce the volume on the TV to its minimum, and
then adjust the volume of the main unit.
Preparation
≥Confirm the audio connection to the AUX/TV terminal (B 7).
≥Set “Auto AUX Link” to “On” (B 15).
During standby mode, when there is audio input to the AUX/TV terminal,
the main unit will automatically turn on and select “AUX/TV” as the
source.
When there is no audio input to the AUX/TV terminal for 30 minutes, the main
unit will turn off.
Preparation
≥Make sure that there is an audio connection between this unit and the
TV or other device. (B 7)
≥Turn on the TV or/and other device.
Press [EXT-IN]4 to choose the source that is used to
connect this unit to the TV or other device.
≥To change the surround sound effects and sound mode, refer to
“Enjoying sound effects from all speakers” (B 10).
Using the START menu
1
Press [START]B to show the START menu.
2
Press [3, 4]8 to select an item and press [OK]8.
≥To exit, press [START]B.
3
Press [3, 4, 2, 1]8 to make the setting and press
[OK]8.
Selecting the source using the remote control
Press To select
[DVD]4 DVD/CD
[RADIO]4 FM (B 8)
[EXT-IN]4 Each time you press the button:
AUX/TV:
USB:
For audio input through the AUX/TV terminal.
(B 13)
e.g.
Input Selection
Setup
DVD/CD Home Cinema
DVD/CD Home Cinema
Input Selection
Setup
Playback Disc
TOP MENU(DVD)
MENU(DVD)
Playback/menu access
Auto AUX Link
Listening to the TV or other device’s
audio from this unit’s speakers
SC-XH20GC_RQT9682-G_eng.book Page 9 Wednesday, January 4, 2012 4:19 PM