Filter
Top Products
20
RQT9686
You can attach all of the speakers (except subwoofer) to a wall.
≥The wall or pillar on which the speakers are to be attached should be
capable of supporting 10 kg per screw. Consult a qualified building
contractor when attaching the speakers to a wall. Improper attachment
may result in damage to the wall and speakers, and personal injury.
1 Drive a screw (not supplied) into the wall.
2 Fit the speaker securely onto the screw(s) with the hole(s).
∫ Tips
Use the measurements indicated below to identify the screwing positions
on the wall.
≥Leave at least 20 mm of space above the speaker and 10 mm on each
side to allow enough space for fitting the speaker.
Speaker installation option
Attaching to a wall
e.g., Center speaker
DO NOT DO
≥In this position, the speaker will
likely fall if moved to the left or
right.
≥Move the speaker so that the
screw is in this position.
At least 30 mm
‰7.0 mm to ‰9.4 mm
Wall or pillar
5.5 mm to 7.5 mm
‰4.0 mm
Center speaker
A 18 mm
B 65 mm
C 24 mm
D 95.5 mm
E 27 mm
Front and surround speakers
Attach to a wall without the base and the stand
∫ To prevent speakers from falling
Front speaker, Surround speaker, Center speaker
e.g. Front speaker
F 65 mm
G 349 mm
H 110 mm
I 51 mm
J 51 mm
Wall
Screw eye
(not supplied)
String (not supplied)
Less than
10 cm
Reattaching the speaker cable
Insert the cable
from the bottom.
Pull out the cable
through the hole.
Leave about
120 mm.
SC-XH185 GS_RQT9686-G_eng.book Page 20 Tuesday, January 10, 2012 8:31 AM