Filter
Top Products
14
Basic play
RQTX0275
Basic play
Preparation
To display the picture, turn on your TV and change its video input mode (e.g. VIDEO 1, AV 1, HDMI, etc.) to suit the
connections to this unit.
[Note]
≥DISC CONTINUES TO ROTATE WHILE MENUS ARE DISPLAYED.
To preserve the unit’s motor and your TV screen, press [∫] (Stop) when you are finished with the menus.
≥Total title number may not be displayed properly on iR/iRW.
Using the main unit
VOLUME
OPEN CLOSE
SELECTOR
12
3
4
MEMORY
5
, + VOLUMEEXCHANGE
5 DISC
SELECTOR
123 45
TUNE
POWER
Start play.
≥Turn [`, i VOLUME] to
adjust the volume.
≥You can enjoy surround
sound when you press
[PLII] on the remote
control to turn on Dolby Pro
Logic II (➜ 26).
(Stop)
Select “DVD/CD”.Turn on the unit.
Press to skip.
Press and hold to
– search during play
– start slow-motion play during pause
≥Press [1] (Play) to start normal play.
Open all the disc trays.
≥To select a desired tray (➜ below, Selecting the desired tray).
≥Press [<OPEN/CLOSE] again to close all the disc trays.
Load the disc.
≥Load double-sided discs so the
label for the side you want to play is
facing up.
≥Press [EXCHANGE] to load discs
one by one.
≥For DVD-RAM, remove the disc
from its cartridge before use.
≥Do not:
– Load more than one disc per tray.
– Push or pull out the tray by hand.
Press to select a disc directly.
≥You can also select the disc using the remote
control (➜ 15, Selecting a disc).
Label
facing up
Selecting
the desired
tray
Press [<OPEN/CLOSE] again to close the tray.
5 DISC
SELECTOR
123 45
OPEN CLOSE
Change
discs
without
interrupting
playback
During play,
≥All trays are opened (except the tray that the disc
is playing).
≥Press [EXCHANGE] to close the top tray.
Press again until all the trays are closed.
≥Press [<OPEN/CLOSE]
to close all the open trays.
EXCHANGE
RQTX0275-P_eng.book Page 14 Tuesday, March 17, 2009 9:34 AM