Panasonic SC-PMX5 Home Theater System User Manual


 
Panasonic Corporation
Web Site: http://panasonic.net
Operating Instructions
CD Stereo System
Model No. SC-PMX5
GN
Thank you for purchasing this product.
For optimum performance and safety, please read these
instructions carefully.
Please keep this manual for future reference.
RQTX9674-B
L0212LL0
En
Do the procedures with the remote control. You can
also use the buttons on the main unit if they are the
same.
Your system and the illustrations can look differently.
These operating instructions are applicable to the following
system.
System SC-PMX5DB
Main unit SA-PMX5DB
Speakers SB-PMX5DB
Safety precautions
WARNING!
Unit
To reduce the risk of fire, electric shock or product
damage,
Do not expose this unit to rain, moisture, dripping or
splashing.
Do not place objects filled with liquids, such as vases,
on this unit.
Use only the recommended accessories.
Do not remove covers.
Do not repair this unit by yourself. Refer servicing to
qualified service personnel.
Do not let metal objects fall inside this unit.
Do not handle the plug with wet hands.
CAUTION!
Unit
To reduce the risk of fire, electric shock or product
damage,
Do not install or place this unit in a bookcase, built-in
cabinet or in another confined space. Ensure this unit
is well ventilated.
Do not obstruct this unit’s ventilation openings with
newspapers, tablecloths, curtains, and similar items.
Do not place sources of naked flames, such as lighted
candles, on this unit.
Set this unit up on an even surface away from direct
sunlight, high temperatures, high humidity, and
excessive vibration.
Do not use a DC power source.
This unit is intended for use in moderate climates.
Install this unit so that the AC mains lead can be
unplugged from the socket outlet immediately if any
problem occurs.
Inside of product
Back of product
This unit may receive radio interference caused by
mobile telephones during use. If such interference
occurs, please increase separation between this unit
and the mobile telephone.
This unit utilizes a laser. Use of controls or adjustments
or performance of procedures other than those specified
herein may result in hazardous radiation exposure.
Battery
Do not break open or short-circuit the battery.
Do not charge the alkaline or manganese battery.
Do not use the battery if the cover has peeled off.
Do not heat or expose to flame.
Do not leave the battery(ies) in a car exposed to direct
sunlight for a long period of time with doors and windows
closed.
Remove the battery if you do not use the remote control
for a long period of time. Keep in a cool, dark area.
Danger of explosion if battery is incorrectly replaced.
Replace only with the type recommended by the
manufacturer.
When disposing the batteries, please contact your local
authorities or dealer and ask for the correct method of
disposal.
– If you see this symbol –
Information on Disposal in other Countries outside
the European Union
This symbol is only valid in the European
Union.
If you wish to discard this product, please
contact your local authorities or dealer and
ask for the correct method of disposal.
MPEG Layer-3 audio coding technology licensed from
Fraunhofer IIS and Thomson.
“Made for iPod” and “Made for iPhone” mean that an
electronic accessory has been designed to connect
specifically to iPod, or iPhone, respectively, and
has been certified by the developer to meet Apple
performance standards.
Apple is not responsible for the operation of this device
or its compliance with safety and regulatory standards.
Please note that the use of this accessory with iPod, or
iPhone may affect wireless performance.
iPhone, iPod, iPod classic, iPod nano, and iPod touch
are trademarks of Apple Inc., registered in the U.S. and
other countries.
Preparing the remote control
R6/LR6, AA
Use alkaline or manganese battery.
Install the battery so that the poles (+ and –) align with
those in the remote control.
Point the remote control at the remote control sensor,
away from obstacles, at a maximum range of 7 m directly
in front of the main unit.
Placement of speakers
The right and left speakers are the same.
To prevent damage to the speakers, do not touch the
speaker cones if you remove the nets.
Use only the supplied speakers.
The combination of the main unit and speakers give the
best sound.
You can cause damage to the system and decrease the
sound quality if you use other speakers.
Note:
Keep your speakers more than 10 mm from the main
unit for ventilation.
Put the speakers on a flat safe surface.
These speakers do not have magnetic shielding. Do
not put them near TVs, PCs or other equipment easily
influenced by magnetism.
When you play at high levels for a long period, it can
cause damage to the system and decrease the life of
the system.
Decrease the volume in these conditions to prevent
damage:
When you play distorted sound.
When you adjust the sound quality.
CAUTION!
Use the speakers only with the recommended
system. If not, you can cause damage to the
amplifier and speakers and can cause a fire.
Consult an approved service personnel if damage
occurs or if there is a sudden apparent change in
performance.
Do the procedures included in these instructions
when you attach the speakers.
Specifications
Amplifier section
RMS output power stereo mode
Front Ch (both ch driven)
20 W per channel (6
), 1 kHz, 10% THD
Total RMS stereo mode power 40 W
Tuner, terminals section
Preset station FM 30 stations, AM 15 stations
Frequency modulation (FM)
Frequency range
87.50 MHz to 108.00 MHz (50 kHz step)
Antenna terminals 75
(unbalanced)
Amplitude modulation (AM)
Frequency range 522 kHz to 1629 kHz (9 kHz step)
520 kHz to 1630 kHz (10 kHz step)
Headphones jack
Terminal Stereo, 3.5 mm jack
AUX
Terminal RCA jack
DAB section
DAB memories 20 channels
Frequency band (wavelength)
Band III (Australia)
9A to 9C (202.928 MHz to 206.352 MHz)
Band III (Others)
5A to 13F (174.928 MHz to 239.200 MHz)
Sensitivity
BER 4x10
-4
Min requirement –98 dBm
DAB external antenna
Terminal F - Connector (75
)
Disc section
Disc played (8 cm or 12 cm)
CD, CD-R/RW (CD-DA, MP3
formatted disc)
Pick up
Wavelength 790 nm (CD)
Laser power CLASS 1 (CD)
Audio output (Disc)
Number of channels 2 ch (FL, FR)
FL = Front left channel, FR = Front right channel
MPEG-1 Layer 3, MPEG-2 Layer 3
USB section
USB port
USB standard USB 2.0 full speed
Media file format support MP3 (
.mp3)
USB device file system FAT 12, FAT 16, FAT 32
USB port power 500 mA (max)
Speaker section
Type 3 way, 3 speaker system (bass reflex)
Speaker unit(s)
Woofer 1.9 cm soft dome type
Tweeter 14 cm cone type
Super tweeter 1.5 cm piezo type
Impedance 3
Output sound pressure 81 dB/W (1 m)
Frequency range 41 Hz to 65 kHz (–16 dB)
48 Hz to 58 kHz (–10 dB)
Dimensions (W x H x D) 161 mm x 240 mm x 262 mm
Mass 2.6 kg
Making the connections
Conserving power
The system consumes approximately 0.7 W when it is in
standby mode. Disconnect the power supply if you do not
use the system.
Some settings will be lost after you disconnect the system.
You have to set them again.
To household mains socket
2
1
3
1 Connect the speakers.
Red
Black
2 Connect the DAB antenna.
Place the antenna where reception is best.
Be sure to fully
tighten the screw.
Tapes
Use DAB outdoor antenna for better reception.
Be sure to fully
tighten the screw.
DAB outdoor antenna
(not supplied)
3 Connect the AC mains lead.
Do not use an AC mains lead from other equipment.
Note:
These speakers do not have magnetic shielding. Do
not put them near TVs, PCs or other equipment easily
influenced by magnetism.
A
B
C
D
E
G
F
H
J
I
K
L
N
M
O
P
R Headphones jack ( )
Plug type: Ø 3.5 mm stereo (not supplied)
Avoid listening for prolonged periods of time to
prevent hearing damage.
Excessive sound pressure from earphones and
headphones can cause hearing loss.
Listening at full volume for long periods may damage
the user’s ears.
Be sure to use the supplied or recommended
headphones or earphones.
S Display panel
T USB port ( )
U Disc tray
V Open or close the disc tray
W Remote control sensor
A Standby/on switch [`], [1]
Press to switch the unit from on to standby mode or
vice versa. In standby mode, the unit is still consuming
a small amount of power.
B Numeric buttons [1 to 9, 0, 10]
To select a 2-digit number
Example: 16: [
10] [1] [6]
C Delete a programmed track
D Select audio source
E Basic playback control
F Select the sound effects
G Select the iPod menu item
H View content information
Decrease the brightness of the display panel
Press and hold the button to use this function.
To cancel, press and hold the button again.
I Clock and timer operation
J Set the program function
K Adjust the volume of the system
L Mute the sound of the system
Press the button again to cancel.
“MUTE” is also cancelled when you adjust the volume
or when you switch off the system.
M Set the play menu item
N Set the radio menu item
O Select the option
P Automatically switch off the system
When you are in disc, USB or iPod/iPhone source, the
auto off function switches off the system if you do not
use the system for 30 minutes.
To cancel, press the button again.
Q iPod/iPhone dock
V
U
Q
D
T
A
W
F
K
R
S
F
E
Top view
Control guide
General
Power supply AC 220 to 240 V, 50 Hz
Power consumption 85 W
Dimensions (W x H x D) 175 mm x 240 mm x 349.8 mm
Mass 4.5 kg
Operating temperature range 0°C to +40°C
Operating humidity range
35% to 80% RH (no condensation)
Power consumption in standby mode
0.7 W (approximate)
Note:
Specifications are subject to change without notice.
Mass and dimensions are approximate.
Total harmonic distortion is measured by the digital
spectrum analyzer.
Supplied accessories
Check and identify the supplied accessories.
1 x AC mains lead
1 x Remote control
(N2QAYB000640)
1 x Remote control battery
1 x DAB antenna
Maintenance
To clean this system, wipe with a soft, dry cloth.
Never use alcohol, paint thinner or benzine to clean this
system.
Before using chemically treated cloth, read the
instructions that came with the cloth carefully.
SC-PMX5_RQT9674-B_DBGN.indd 1SC-PMX5_RQT9674-B_DBGN.indd 1 12/22/2011 9:31:38 AM12/22/2011 9:31:38 AM
Safety sending
2/12/2012
Confidential
Until: