Filter
Top Products
RQTV0177
4
4
Getting started
Step 1Step 1
- Making the connections - Making the connections
Connect the AC mains lead only after all other connections have been made.
To household
mains socket
3
Connect the speaker cables.
2
Connect the FM indoor antenna.
Tape the antenna to a wall or column, in a
position with least amount of interference.
1
Connect the AM loop antenna.
Stand the antenna up on its base. Keep the loose antenna cord
away from other wires and cords.
4
Connect the AC mains lead.
The included AC mains lead is for use with this unit
only. Do not use it with other equipment.
Insertion of connector
Connector
Red (ª)
Black (·)
Red (ª)
Black (·)
Even when the connector is perfectly inserted,
depending on the type of inlet used, the front part of
the connector may jut out as shown in the drawing.
However there is no problem using the unit.
Appliance inlet
Incorrect connection can damage the unit.
AM loop antenna
Adhesive
tape
FM indoor
antenna
PM45_E_EN.indd 4PM45_E_EN.indd 4 2/2/07 11:21:04 AM2/2/07 11:21:04 AM