Owner’s Manual
Compact Speaker System
Model No. SC-MC07
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions carefully.
Please keep this manual for future reference.
Register online at www.panasonic.com/register (U.S. customers only)
If you have any questions, contact:
U.S.A. and Puerto Rico : 1-800-211-PANA (7262)
P
Panasonic Corporation 2012
Printed in China
One Panasonic Way, Secaucus,
New Jersey 07094
http://www.panasonic.com
Panasonic Consumer Marketing Company of North America,
Division of Panasonic Corporation of North America
IMPORTANT SAFETY INSTRUCTIONS
Read these operating instructions carefully before using the unit. Follow the safety instructions
on the unit and the applicable safety instructions listed below. Keep these operating
instructions handy for future reference.
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
8 Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9 Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding-type plug has two blades and
a third grounding prong. The wide blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
10 Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11 Only use attachments/accessories specified by the manufacturer.
12 Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid injury from
tip-over.
13 Unplug this apparatus during lightning storms or when unused for long
periods of time.
14 Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate normally, or has been dropped.
WARNING
To reduce the risk of fire, electric shock or product damage,
• Do not expose this unit to rain, moisture, dripping or splashing.
• Do not place objects filled with liquids, such as vases, on this unit.
• Use only the recommended accessories.
• Do not remove covers.
• Do not repair this unit by yourself. Refer servicing to qualified service personnel.
CAUTION
Unit
• Do not place sources of naked flames, such as lighted candles, on this unit.
• Product identification marking is located on the bottom of the unit.
Batteries
• Danger of explosion if battery is incorrectly replaced. Replace only with the type
recommended by the manufacturer.
• Mishandling of batteries can cause electrolyte leakage and may cause a fire.
– Do not mix old and new batteries or different types at the same time.
– Do not heat or expose to flame.
– Do not leave the battery(ies) in a car exposed to direct sunlight for a long period of
time with doors and windows closed.
– Do not take apart or short circuit.
– Do not recharge alkaline or manganese batteries.
– Do not use batteries if the covering has been peeled off.
– Remove batteries if you do not intend to use this unit for a long period of time. Store
in a cool, dark place.
• When disposing the batteries, please contact your local authorities or dealer and ask
for the correct method of disposal.
Safety precautions
FCC Note:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: To assure continued compliance, follow the attached installation instructions
and use only shielded interface cables with ferrite core when connecting to computer or
peripheral devices.
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.
Declaration of Conformity
Trade Name: Panasonic
Model No.: SC-MC07
Responsible Party:
Panasonic Corporation of North America
One Panasonic Way, Secaucus, NJ 07094
Support Contact:
Panasonic Consumer Marketing Company of North America
1-800-211-PANA (7262)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
Check the supplied accessories before using this unit.
1 USB cable (RFE0242)
• Product numbers provided in this Owner’s Manual correct as of May 2012. These may be
subject to change.
• Do not use any other USB cables except the supplied one.
Please connect to a PC using the USB cable (supplied) or use batteries (not
supplied).
Connecting the USB cable
• Do not use any other USB cables except the supplied one. (Operation is not guaranteed.)
• Do not connect two or more USB devices to a PC. (Operation is not guaranteed.)
Inserting the batteries
Insert so the poles (i and j) match those in this unit.
• Use alkaline batteries.
• If the battery is low, the indicator will change from blue to red.
Note
• Connection to a USB port of a PC provides the unit with the power supply only;
communication with the PC or charging of the unit does not work.
• USB is higher priority than battery, when this unit is connected to a PC and the battery is
inserted at the same time.
By using the Bluetooth
®
connection, you can listen to the sound from the
Bluetooth
®
audio device
with this unit wirelessly.
Preparation
Switch on the Bluetooth
®
feature of the device and put the device near this
unit. Read the operating instructions of Bluetooth
®
audio device for its
operation.
Pair with another device and listen to audio
1 Press [Í/I] to turn this unit on.
• If using this unit for the first time, please go to Step 3.
2 Press and hold [ ] for 2 seconds.
• The indicator will blink fast and the unit will enter pairing standby mode.
• When this unit is operated on batteries, it functions as a battery check indicator.
(See “Control reference guide”)
3 In the Bluetooth
®
pairing settings of the Bluetooth
®
device, select to
pair with “SC-MC07”.
• Depending on the device, connection may take place automatically when pairing is
selected. In this case, go to Step 5.
• If prompted for a passkey, input “0000”.
4 In the Bluetooth
®
connecting settings of the Bluetooth
®
device,
select to connect with “SC-MC07”.
• When the connection is made, the indicator on the unit lights up.
5 Start playback on the Bluetooth
®
device.
• Adjust the volume using the [- VOL +] buttons on the unit.
When the maximum or minimum volume is reached, you will be notified by a beep
sound.
Disconnecting
• Switch off this unit or the device.
• Stop / disable the Bluetooth
®
transmission of the device.
Listening to audio from a paired device
When this unit is turned on, the indicator will blink slowly indicating that the
unit is in connection standby mode. Please perform Steps 4 and 5.
• When the power is turned on, this unit is connected to the last-used Bluetooth
®
device. At
this point, please perform Step 5.
Note
• This unit can only connect to one device at a time.
• You can pair up to 6 devices with this unit. If a 7th device is paired, the device with the oldest
connection history will be replaced.
• Panasonic bears no responsibility for data and/or information that can possibly be
compromised during a wireless transmission.
This unit automatically switches off if there is no audio input and you do not
use it for approximately 10 minutes.
Accessories
Power supply preparation
USB cable (supplied)
LR6, AA (Alkaline)
(not supplied)
Pull the sheet to remove the batteries
Control reference guide
Listening to audio from a Bluetooth
®
device
Auto Power Off
Front
Rear
Status Indicator
• Blue: Power on and Bluetooth
®
mode
• Red: Low battery
Adjust the volume
Power on/off (Í/I)
Start Bluetooth
®
pairing mode
USB port
• When you listen to the sound, face the front side of the unit.
(The speaker is built into the front side.)
VQT4L28
F0512SY0
SC-MC07P.fm 1 ページ 2012年5月16日 水曜日 午後3時53分