Filter
Top Products
19
Operating Instructions
No sound (or image).
≥ Turn muting off. (> 14)
≥ Check the connections to the other devices.
(> 11)
≥ Check the audio output settings on the connected
device.
≥ Turn this unit off and then on again.
≥ When connected to an ARC compatible TV,
check if the TV’s connected terminal is ARC
compatible.
≥ If the connections are correct, there might be a
problem with the cables. Reconnect the unit with
different cables.
≥ When using the optical digital audio cable, this
system is not able to play audio with a sampling
frequency greater than 48 kHz.
Sound is not heard when playing DVD-Audio.
≥ This may occur due to digital copyright protection
of the disc when using the optical digital audio
cable. This system is not able to play audio with a
sampling frequency greater than 48 kHz.
If the “ D/DTS” indicator is blinking, unplug
the AC mains lead and consult your dealer.
If the “TV, BD/DVD” indicator is blinking, try the
following to correct the problem. Consult your
dealer if the problem persists.
≥ Turn the connected device off and on again.
≥ Turn this unit off and reconnect the HDMI cables
and then turn this unit on again.
If this unit is connected to a non-Panasonic
ARC compatible TV, connect using an optical
digital audio cable. (> 11)
≥ After connecting the optical digital audio cable,
the setting of this unit must be changed to specify
the audio input terminal. (> 20, “TV Audio”)
Audio is output from the TV speakers and not
this unit’s.
≥ When connected to a VIERA Link (HDAVI
Control) compatible TV, change the audio output
settings to this unit. (> 16)
Both main and secondary audio are output
simultaneously.
≥ Change the digital audio output setting on the TV
or connected device and then select the desired
audio channel. (For details, refer to the operating
instructions for the TV or connected device.)
No power.
≥ Ensure the AC mains lead of the active
subwoofer is connected properly.
After turning the subwoofer on, it immediately
turns off.
≥ Unplug the AC mains lead and consult your
dealer.
No sound from the subwoofer.
≥ Check that the active subwoofer is turned on.
≥ Check that the wireless link indicator lights green.
(> 13)
The wireless link indicator lights red.
≥ There is no link between this unit and the active
subwoofer.
jCheck that this unit is turned on.
jEnsure that the digital transmitter is fully
inserted into the digital transmitter dock on this
unit. (> 12)
jTurn the active subwoofer off and then back on.
Alternatively, turn the active subwoofer off,
disconnect the AC mains lead and then
reconnect it.
Consult your dealer if the problem persists.
The audio from the subwoofer is interrupted.
≥ The active subwoofer is automatically seeking a
clear channel. If the interference persists, try
moving the other wireless devices to another
location outside the range of the active
subwoofer or move the active subwoofer nearer
to this unit. (> 9)
Sound
Active subwoofer
SCHTB500EGGNGS_RQTX1185-B.book Page 19 Wednesday, July 7, 2010 5:18 PM