Filter
Top Products
6
RQT9841
Control reference guide
1 Standby/on switch (Í/I)
Press to switch the unit from on to standby mode or
vice versa. In standby mode, the unit is still
consuming a small amount of power.
2 Adjust the volume of this system
3 Select the input source
“TV” ------------# “BD/DVD”
^-------- “”(------}
4 Speaker angle indicator (> 8)
Angle 1: 0
o
tilt
Speaker angle indicator lights green
Angle 2: Tilted at 30
o
Speaker angle indicator lights amber
Angle 3: Tilted at 80
o
/90
o
Speaker angle indicator lights red
5 Input selector indicators
§1
A Bluetooth
®
indicator
Lights blue when the Bluetooth
®
device is the
audio source
B TV indicator
Lights green when the TV is the audio source
C BD/DVD indicator
Lights amber when the device connected to the
BD/DVD terminal is the audio source
6 Sound mode indicators
§1
D STANDARD indicator
Lights when STANDARD is the current sound
mode
E STADIUM indicator
§2
Lights when STADIUM is the current sound
mode
F MUSIC indicator
§2
Lights when MUSIC is the current sound mode
G CINEMA indicator
Lights when CINEMA is the current sound mode
H NEWS indicator
Lights when NEWS is the current sound mode
I STEREO indicator
Lights when STEREO is the current sound mode
7 Remote control signal sensor (> 7)
1 AC IN terminal (> 18)
2 Ir SYSTEM terminal (> 17)
3 OPTICAL DIGITAL AUDIO IN (TV) terminal
(> 15)
4 HDMI OUT terminal (ARC compatible) (> 15)
5 HDMI IN terminal (> 16)
6 USB port (for service use only)
§1 The indicators will also blink in various conditions. (> 29)
§2 The indicator blinks for 5 sec when the main unit detects an audio format.
To manually verify the current audio format and the corresponding indicators, refer to page 23
(Audio format indicator).
This system (Front)
1
2
3
7
4 56
This system (Rear)
6
SC-HTB170P_RQT9841-P.book Page 6 Friday, January 25, 2013 2:48 PM