Filter
Top Products
11
Operating Instructions
You can output the audio signal from the connected HDMI compatible Blu-ray player, DVD player, etc. with
this unit and pass the signal through to your TV.
Preparation
≥Connect this unit to the TV. (> 10)
≥ Refer to the operating instructions of the connected HDMI compatible device for the necessary setting, to output the video and
audio signals.
≥Connect only after all other connections are complete.
≥This unit consumes a small amount of AC power, even when it is in standby mode (approx. 0.2 W). In the
interest of power conservation, if you will not be using this unit for a long time, unplug it from the
household mains socket.
≥The supplied AC mains lead is for use with this unit only.
Do not use it with other equipment. Also, do not use cords for other equipment with this unit.
Connection from an HDMI compatible device
AC mains lead connection
(For Saudi Arabia and Kuwait)
BE SURE TO READ THE CAUTION FOR THE AC MAINS LEAD ON PAGE 19 BEFORE
CONNECTION.
AV OUT
HDMI AV IN
A HDMI cable (not supplied)
E.g., Blu-ray Disc Player
AC IN
110
−
127V
220
−
240V
VOLT ADJ
A AC mains lead (supplied)
≥Do not use any other AC mains lead except the
supplied one.
B To a household mains socket
(For Asia and Africa)
Before connecting the AC mains lead
Set the voltage.
Use a flat-head screwdriver to move the voltage selector to
the appropriate position for the area in which this system is
used.
SCHTB10EGGNGS_RQTX1160-B.book Page 11 Thursday, June 10, 2010 3:18 PM