Filter
Top Products
30
RQT7436
Safety precautions/Maintenance Other speaker setup options
Other speaker setup options
∫ Attaching to a wall
1 Drive a screw (not included)
into a wall.
2 Fit the speaker securely onto
the screw(s) with the hole(s).
≥The wall or pillar on which the
speakers are to be attached
should be capable of supporting
10 kg per screw. Consult a qualified building contractor when
attaching the speakers to a wall. Improper attachment may result in
damage to the wall and speakers.
≥When mounting the front and surround speaker to a wall, we
recommend using a string (not included) to prevent it from falling
(‹ page 5).
≥Use of optional speaker cables is recommended for wall-mounted
front and surround speakers. (You can also remove the speaker
cables from the pipes supplied with this system.)
∫ Fitting speaker stands (not included)
(Center speaker only)
Ensure the stands meet these conditions before purchasing them.
Note the diameter and length of the screws and the distance
between screws as shown in the diagram.
≥The stands must be able to support over 10 kg.
≥The stands must be stable even if the speakers are in a high
position.
Wall or pillar
In this position, the
speaker will likely
fall if moved to the
left or right.
Move the speaker so
that the screw is in
this position.
Attach the stands to these metal screw holes.
Plate thickness plus 7 to 10 mm
5 mm, pitch 0.8 mm
60 mm
Speaker stand
(not included)
Safety precautions
Set the unit up on an even surface away from direct sunlight, high
temperatures, high humidity, and excessive vibration. These
conditions can damage the cabinet and other components, thereby
shortening the unit’s service life.
Do not place heavy items on the unit.
Do not use high voltage power sources. This can overload the unit
and cause a fire.
Do not use a DC power source. Check the source carefully when
setting the unit up on a ship or other places where DC is used.
Ensure the AC mains lead is connected correctly and not
damaged. Poor connection and lead damage can cause fire or
electric shock. Do not pull, bend, or place heavy items on the lead.
Grasp the plug firmly when unplugging the lead. Pulling the AC
mains lead can cause electric shock.
Do not handle the plug with wet hands. This can cause electric
shock.
Do not let metal objects fall inside the unit. This can cause electric
shock or malfunction.
Do not let liquids get into the unit. This can cause electric shock or
malfunction. If this occurs, immediately disconnect the unit from the
power supply and contact your dealer.
Do not spray insecticides onto or into the unit. They contain
flammable gases which can ignite if sprayed into the unit.
Do not attempt to repair this unit by yourself. If sound is
interrupted, indicators fail to light, smoke appears, or any other
problem that is not covered in these instructions occurs, disconnect
the AC mains lead and contact your dealer or an authorized service
center. Electric shock or damage to the unit can occur if the unit is
repaired, disassembled or reconstructed by unqualified persons.
Extend operating life by disconnecting the unit from the power
source if it is not to be used for a long time.
Clean this unit with a soft, dry cloth.
≥Never use alcohol, paint thinner or benzine to clean this unit.
≥Before using chemically treated cloth, carefully read the
instructions that came with the cloth.
Placement
Voltage
AC mains lead protection
Foreign matter
Service
Maintenance
Before moving the unit, ensure the disc trays are empty.
Failure to do so will risk severely damaging the discs and the
unit.
Front and surround speakers
Center speaker
230 mm
150 mm