Filter
Top Products
11
RQTX0175
TRANSMITTER
DIGITAL
PUSH PUSH
2
3
1
1
2
AC IN
~
AC IN
~
Auto speaker setup
STEP 4Auto speaker setup
Auto speaker setup allows you to achieve a satisfactory listening environment easily with the use of the supplied calibration microphone
as a detector of sound signals. The unit will first perform automatic speaker detection, then checks and adjusts the following settings.
Process for auto speaker setup
Loud test tones are output from the speakers during setup, so keep children out of the room.
Checks which speakers you have connected.•
DETECTION
DISTANCE
Chec
ks the distance of each speaker from the listening position and adjusts the
timing of each channel automatically.
•
Connect the calibration
microphone to the
[SETUP MIC] jack on
the front panel.
Note
The calibration microphone is sensitive to
heat. Keep it away from direct sunlight and
do not place it on top of the unit.
Placing of calibration
microphone.
P
lace on a flat surface at the seating area.
Set calibration microphone position at
your ear height.
•
•
Turn on the unit.
Press
.
The standby indicator goes off when you turn on the unit.•
Calibration microphone
(included)
Before setup
Conduct the auto speaker setup in a quiet environment. A noisy background will give unsatisfactory results.
Mak
es any further corrections to the frequency response.•FREQUENCY
LEVEL
Chec
ks and adjusts each speaker level automatically.•
Turn off all components before making any connections.
Peripheral equipment and cables sold separately
unless otherwise indicated.
To connect equipment, refer to the appropriate
operating instructions.
•
•
•
SC-HT56P_MP (RQTX0175-2P).indb 11 9/19/2008 12:28:24 PM