Filter
Top Products
11
Getting started
VQT5F59
Setting up the system
Follow the “Owner’s Manual <Setup>” to set up
the system first.
∫ Speakers
≥ Keep your speakers at least 10 mm away from
the system to avoid noise generated by
resonance.
≥ For optional wall mount, refer to page 32.
Centre speaker
≥ Put it on a rack or shelf not to interfere with the
TV’s various sensors (ambient light, etc.).
Vibration caused by the speaker can disrupt the
picture if it is placed directly on the TV.
Surround speakers
≥ Place the speakers at the same height or higher
than ear level.
∫ HDMI
≥ Use the ARC* compatible High Speed HDMI
cables. Non-HDMI-compliant cables cannot be
utilized.
It is recommended that you use Panasonic’s
HDMI cable. When outputting 1080p signal,
please use HDMI cables 5.0 meters or less.
* ARC is an abbreviation of Audio Return Channel, also
known as HDMI ARC. This feature allows a home theatre
system to receive and play audio from the TV through a
single HDMI cable without additional wiring.
∫ DIGITAL AUDIO IN
≥ The dual audio cannot be changed. Change the
setting on the connected device.
∫ AC mains lead
≥ This unit consumes a small amount of AC
power (> 40) even when turned off in standby
mode. For the purpose of energy conservation,
the unit should be disconnected if you will not
be using it for extended period of time.
Precautions
Other device connection
OPTICAL
OUT
e.g.,
Optical digital audio cable
(not supplied)
Set Top Box, etc.
SC-BTT465&405&105EB-VQT5F59_mst.book 11 ページ ２０１４年１月２４日 金曜日 午後３時４４分