Filter
Top Products
14
RQT8043
RQTX0169
LANG - 5
LANG - 5
LANG - 4
LANG - 4
FRANÇAIS
FRANÇAIS
DANSK
DANSK
ENGLISH
ENGLISH
Timer (continued)
To activate the timer
5
Press and hold [– ˚PLAY/REC] to turn on your desired timer.
˚ PLAY
no display (off)
˚ REC
6 Press [y] to turn off the unit.
The unit must be off for the timers to operate.
Other basic operations
To Action
change the
settings
Repeat steps 1 to 4 and 6 (\ see page 13 and
above).
change the
source or
volume
1) Press and hold [– ˚PLAY/REC] to clear the
timer indicator from the display.
2) Make changes to the source or volume.
3) Perform steps 5 to 6 (
\ see above).
check the set-
tings
Press and hold [– CLOCK/TIMER] repeatedly to
select ˚PLAY or ˚REC.
cancel Press and hold [– ˚PLAY/REC] to clear the timer
indicators from the display.
If you use the unit after the timers are set
After using, check that the correct tape/disc are loaded before turning
the unit off.
Note:
• The play timer will start at the preset time with volume increasing
gradually to preset level.
• The record timer will start 30 seconds before the set time with the
volume muted.
• The timer comes on at the set time everyday if the timer is on.
• The unit must be in the standby mode for the timer to function.
• If you turn the unit off and on again while a timer is functioning, the
fi nish time setting will not be activated.
• If MUSIC PORT is selected as the source when the timer comes
on, the system turns on and engages MUSIC PORT as the source.
If you wish to playback or record from the portable audio equip-
ment, just activate the equipment’s play mode and increase the
volume. (See the portable audio equipment’s instruction manual.)
Using the sleep timer
Using the sleep timer
This function enables you to turn off the unit automatically after the
set time.
Press [SLEEP] to select your desired time.
SLEEP 30 SLEEP 60
SLEEP 90
SLEEP OFF
SLEEP 120
Sleep timer indicator
To cancel
Press [SLEEP] to select “SLEEP OFF”.
Changing the remaining time
Press [SLEEP] to show the remaining time and press [SLEEP] again
to select your desired time.
Note:
• The play and sleep timer or the record and sleep timer can be used
together.
• The sleep timer always has priority. Be sure not to overlap timer set-
tings.
• The sleep timer turns off when you perform the record function.
Selecting sound effects
Selecting sound effects
Preset EQ
Press [PRESET EQ] repeatedly to select your desired setting.
HEAVY
SOFT CLEAR VOCAL FLAT (off)
Setting Effect
HEAVY Adds punch to rock
SOFT For background music
CLEAR Clarifi es higher frequencies
VOCAL Adds gloss to vocal
FLAT No effect
Manual EQ
1 Press [MANUAL EQ] repeatedly to select your desired
setting.
BASS MID
TREBLE
Setting Effect
BASS For lower pitch sound
MID For middle pitch sound
TREBLE For higher pitch sound
2 Press [4, / REW ] or [¢, / FF] to adjust the level.
OR
Press [+] or [–] on the main unit to adjust the level.
Note:
• The level of the pitch is between -3 to +3.
• The changes you make are stored and automatically recalled the
next time you select “MANUAL EQ”.
Enhancing the bass sound
Enhancing the bass sound
You can enhance low-frequency sound so that heavy bass sound can
be heard clearly, even if the acoustics of your room are not optimal.
To activate
Press [HARD BASS].
To cancel
Press [HARD BASS] again.
Note:
The actual effect depends on the disc.
Sound adjustment
RQTX0169-P.indd 14RQTX0169-P.indd 14 7/18/08 9:25:01 AM7/18/08 9:25:01 AM