Filter
Top Products
13
RQT8043
RQTV0196
LANG - 5 LANG - 4 FRANÇAIS DANSK DEUTSCH
FM/AM radio
TUNER /
BAND
Manual tuning
Manual tuning
1
Press [TUNER / BAND] to select “FM” or “AM”.
2
Press [PLAY MODE] to select “MANUAL”.
3
Press [4, / REW] or [¢, / FF] to select the
frequency of the required station.
“
” is displayed when a stereo FM broadcast is being
received.
To tune automatically
Press and hold [4, / REW] or [¢, / FF] until the
frequency starts changing rapidly. The unit begins auto
tuning, stopping when it fi nds a station.
• Auto tuning may be interrupted when there is excessive
interference.
• To cancel auto tuning, press [4, / REW] or
[¢, / FF] once again.
To improve FM sound quality
Press and hold [PLAY MODE] to display “MONO”.
To cancel
Press and hold [PLAY MODE] again until “MONO”
disappears.
• MONO is also cancelled if the frequency is changed.
• Turn off “MONO” for normal listening.
RDS broadcasting (For Europe)
This unit can display the text data transmitted by the radio
data system (RDS) available in some areas.
If the station you are listening to is transmitting RDS
signals, “RDS” will light up on the display.
Press [DISPLAY] to display:
Station name
➞
Program Type
➞ Frequency display
(PS) (PTY)
Program type displays
NEWS
AFFAIRS
INFO
SPORT
EDUCATE
DRAMA
CULTURE
SCIENCE
VARIED
POP M
ROCK M
M-O-R- M
LIGHT M
CLASSICS
OTHER M
WEATHER
FINANCE
CHILDREN
SOCIAL A
RELIGION
PHONE IN
TRAVEL
LEISURE
JAZZ
COUNTRY
NATIONAL
OLDIES
FOLK M
DOCUMENT
TEST
ALARM
M-O-R- M = “Middle-of-the-Road music”
Note:
RDS displays may not be available if reception is poor.
TUNER /
BAND
Memory preset
Memory preset
20 FM and 15 AM stations can be preset.
Preparation
Press [TUNER / BAND] to select “FM” or “AM”.
Automatic presetting
1
Tune to the frequency where presetting is to begin.
2
Press and hold [PROGRAM] to start presetting.
The tuner presets all the stations it can receive into the
channels in ascending order. When fi nished, the last station
memorized is tuned in.
Manual presetting
1
Press [PLAY MODE] to select “MANUAL”.
2
Press
[4, / REW] or [¢, / FF]
to tune to the
required station.
3
Press [PROGRAM].
4
Press the numeric buttons to select a channel.
For channels 10 to 20 press [
h
10], then the two digits.
The station occupying a channel is erased if another
station is preset to that channel.
Selecting a preset station
Press the numeric buttons to select the channel.
OR
1
Press [PLAY MODE] to select “PRESET”.
2
Press
[4, / REW] or [¢, / FF] to select the
channel.
RQTV0196-B.indd 13RQTV0196-B.indd 13 2/23/07 4:49:27 PM2/23/07 4:49:27 PM