Filter
Top Products
ENGLISH
RQTX0192
54
54
Connect the AC power supply cord only after all the other connections have been made.
Simple setup
Making the connections
4
4
R
L
Connect the AM loop antenna.
AM loop antenna
Connect the FM indoor antenna.
Adhesive tape
FM indoor antenna
Tape the antenna to a wall or column, in a position with the
least amount of interference.
Connect the speaker cables.
Insert
fully
Connect the AC power supply cord.
The included AC power supply cord is for use with this unit only. Do not
use it with other equipment.
Do not use an AC power supply cord from other equipment.
Conserving power
The unit consumes approx. 0.35 W even when it is turned off with
[8, POWER]. To save power when the unit is not to be used for a long
time, unplug it from the household AC outlet. Remember to reset the
radio stations and any other memory items before using the unit again.
Stand the antenna up on its base. Keep the loose antenna
cord away from other wires and cords.
To household
AC outlet
FM outdoor antenna
75 Ω coaxial cable
(not included)
AM outdoor antenna
Never use an outdoor antenna during a lightning storm.
You can connect the FM outdoor antenna for better reception. Please consult your dealer for installation.
Disconnect the FM indoor antenna if an FM outdoor antenna is installed.
Connect the AM outdoor antenna without removing the AM loop antenna. Run 5 to 12 m (16 to 40 feet) of vinyl-covered wire horizontally along a
window or other convenient location.
•
•
•
•
FM outdoor antenna (not included)
5 to 12 m
(16 to 40 ft.)
AM outdoor antenna (not included)
AM loop antenna
(included)
Optional antenna connections
4 5
SC-PM38_PP_En_081230 (pg 1-17).indd 4 2/25/2009 4:28:27 PM