Filter
Top Products
3
RQT7912
3
Caution for AC Mains Lead
(For United Kingdom)
(“EB” area code model only)
For your safety, please read the following text carefully.
This appliance is supplied with a moulded three pin mains plug
for your safety and convenience. A 5-ampere fuse is fitted in
this plug. Should the fuse need to be replaced please ensure
that the replacement fuse has a rating of 5-ampere and that it is
approved by ASTA or BSI to BS1362. Check for the ASTA mark
Ï or the BSI mark Ì on the body of the fuse.
If the plug contains a removable fuse cover you must ensure
that it is refitted when the fuse is replaced. If you lose the fuse
cover the plug must not be used until a replacement cover is
obtained.
A replacement fuse cover can be purchased from your local
dealer.
If a new plug is to be fitted please observe the wiring code as
stated below.
If in any doubt please consult a qualified electrician.
IMPORTANT
The wires in this mains lead are coloured in accordance with
the following code:
Blue: Neutral, Brown: Live.
As these colours may not correspond with the coloured
markings identifying the terminals in your plug, proceed as
follows:
The wire which is coloured Blue must be connected to the
terminal which is marked with the letter N or coloured Black or
Blue.
The wire which is coloured Brown must be connected to the
terminal which is marked with the letter L or coloured Brown or
Red.
WARNING: DO NOT CONNECT EITHER WIRE TO THE
EARTH TERMINAL WHICH IS MARKED WITH THE LETTER
E, BY THE EARTH SYMBOL Ó OR COLOURED GREEN OR
GREEN/YELLOW.
THIS PLUG IS NOT WATERPROOF — KEEP DRY.
Before use
Remove the connector cover.
How to replace the fuse
The location of the fuse differ according to the type of AC mains
plug (figures A and B). Confirm the AC mains plug fitted and
follow the instructions below.
Illustrations may differ from actual AC mains plug.
Maintenance
If the surfaces are dirty
To clean this unit, wipe with a soft, dry cloth.
≥ Never use alcohol, paint thinner or benzine to clean this unit.
≥ Before using chemically treated cloth, read the instructions
that comes with the cloth carefully.
For a cleaner crisper sound
Clean the heads after every 10 hours of use to assure good
quality playback and recording.
Use a cleaning tape (not included).
Cassette tape care
≥ Tapes exceeding 100 minutes are thin and can break or get
caught in the mechanism.
≥ Tape slack can get caught up in the mechanism and should
be taken up before the tape is played.
≥ Endless tapes can get caught up in the deck’s moving parts if
used incorrectly.
CD Selection
Choose CDs with this mark: (A).
This unit can play CD-DA (digital audio)
format audio CD-R and CD-RW that have
been finalized (a process that enables
CD-R/CD-RW players to play audio CD-R and CD-RW)
upon completion of recording. It may not be able to play
some CD-R or CD-RW due to the condition of the recording.
Do not
≥ use CDs in irregular shape.
≥ use CDs with labels and stickers that are coming off or with
adhesive exuding from under labels and stickers.
≥ attach scratch-proof covers or any other kind of accessory.
≥ write anything on the CD.
≥ clean CDs with liquids. (Wipe with a soft, dry cloth.)
≥ use CDs printed with label printers available on the market.
CAUTION!
IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR
THE SOCKET OUTLET IN YOUR HOME THEN THE
FUSE SHOULD BE REMOVED AND THE PLUG CUT
OFF AND DISPOSED OF SAFELY. THERE IS A
DANGER OF SEVERE ELECTRICAL SHOCK IF THE
CUT OFF PLUG IS INSERTED INTO ANY 13-AMPERE
SOCKET.
1. Open the fuse cover with a screwdriver.
2. Replace the fuse and close or attach the fuse cover.
Fuse cover
Figure A Figure B
Figure A Figure B
Fuse
(5 ampere)
Fuse
(5 ampere)
A
E_EB_GN_RQT7912-B.book 3 ページ ２００４年１２月８日 水曜日 午後４時１５分