Panasonic RP-WF930 Headphones User Manual


 
12
ENGLISH
ENGLISH
RQT7572
4
5
6
7
L
R
3
TUNING
TUNING
OPR / CHG
MAX
VOL
MIN
ONOFF
OPR
ONOFF
OPR
MAX
VOL
MIN
MAX
VOL
MIN
Operation
1
Turn on the unit the transmitter is
connected to.
2
Turn the volume on the sound
source up as much as possible with-
out causing distortion.
Headphones are more susceptible to
noise interference when the source
volume is set to low.
3
Remove the headphones from the
transmitter.
4
Reduce the volume of the head-
phones with the [VOL] dial.
5
Switch the [OPR] switch to ON.
The OPR indicator goes red.
Put the headphones on.
6
Adjust the volume on the head-
phones.
7
If there is interference, press the
[TUNING] button to reduce it.
The frequency is adjusted automatically.
See page 14 for more detailed instructions on how
to reduce interference.
After listening
1 Take the headphones off.
2 Switch the [OPR] switch to OFF.
The OPR indicator goes out.
3 Rest the headphones on the transmitter, and
recharge them.
4 Turn off the unit the transmitter is connected to.
Note
¡Avoid listening for prolonged periods of time to prevent
hearing damage.
¡Discontinue use if you experience discomfort with the
headphones that directly contact your skin.
Continued use may cause rashes or other allergic reac-
tions.
Concerning the AUTO POWER ON/OFF
function:
When audio signals are supplied, the transmitters power
is turned on (The OPR/CHG indicator lights in
red.); when audio signals have not been supplied for 2
or 3 minutes, its power is automatically turned off. (The
OPR/CHG indicator goes out.)
When the volume of the connected unit is too low, this
function doesnt work. Turn up the volume as much as
possible without causing distortion.