Panasonic PT-47WX33 Home Theater System User Manual


 
12 l
REMOTE CONTROL OPERATION (MODELS PT-47WXC43 AND PT-47WX33)
Programming The Remote
The Universal Remote Control can be programmed to
operate many manufacturers’ components, using the
component function buttons for VCR, DVD, CABLE or
DBS. Follow the procedures for programming your Remote
Control with or without a code for the component.
Note: Determine the manufacturer of the component and look
in the table for the code.
Procedure
Confirm that the external component is plugged and
operating.
Turn the component off.
Press and together, for at least 5
seconds.
Press appropriate component button on the Remote
Control VCR, DVD, CABLE or DBS.
Enter the 3-digit component code using the Remote
Control numeric keypad (0 ~ 9 buttons).
Press the Remote Control to test the
component. If the procedure was successful, the
component will turnon.
Note: If the component does not operate with the Remote
Control, repeat the procedure using another code.
(Some brands have multiple codes). If an incorrect code
is entered, or if the procedure takes longer than 30
seconds, the programming will fail.
Programming Without A Code
This procedure searches all codes and is called the
“sequence method.”
Confirm that the external component is plugged in
and on.
Turn the component off.
Press and together, for at least 5
seconds.
Press appropriate component button on the
Remote Control.
Press VOL u to move forward to the next code.
Press t VOL to move backward.
Press the Remote Control to test the
component. If the procedure was successful, the
component will turn on.
Note: Repeat the above steps until the component code is
found. It may take many attempts before the correct
code isfound.
After the code is found, press to store the
code.
Component Codes
The Universal Remote Control is capable of operating
many component brands after entering a code. Some
components may not operate because the codes are not
available due to limited memory. The Universal Remote
Control does not control all features found in each model.
Device Operates Default
TV TV (Panasonic Only) Panasonic Code
DBS/CBL DBS STB & CBL STB (Preset) Panasonic DBS Code
VCR VCR (Preset) Panasonic Code
DVD DVD (Preset) Panasonic Code
ACTION
POWER
POWER
ACTION
POWER
POWER
ACTION
Write the code numbers from tables in this space.
This will serve as a reference if you need to program
your Remote Control.
VCR CABLE DVD
DBS