Filter
Top Products
6
ADJUSTING THE HIGH
CUT FREQUENCY
FREQUENCY HZ
adjusts the level (be-
tween 50 Hz and 200 Hz) at which the
subwoofer begins passing frequen-
cies to other speakers. This control’s
setting depends on the low frequency
capabilities of your satellite speakers
(if used), speaker placement, and oth-
er factors that affect bass perfor-
mance.
While playing music, rotate
FREQUEN-
CY HZ
clockwise until it sounds like the
music is too bass-heavy. Then rotate it
counterclockwise until the bass
sounds more natural.
If the mid-bass sounds natural but you
want more low bass, rotate
FREQUEN-
CY HZ
counterclockwise a little, then
rotate
VOLUME
CONTROL
clockwise
by about the same amount. This in-
creases low bass output without affect-
ing the mid-bass output.
To reduce low bass output without af-
fecting the mid-bass output equally, ro-
tate
FREQUENCY HZ
clockwise and
VOLUME
CONTROL
counterclockwise.
Note:
Rotate
FREQUENCY HZ
fully
clockwise (200 Hz) when using the
PRO-SW100P with the Mini Home
Theater Satellite Speakers (Ra-di-
oShack Cat. Nos. 40-4082/4083) and
Mini Home Theater Center Speaker
(Cat. No. 40-4084).
40-4080.fm Page 6 Wednesday, August 11, 1999 10:58 AM