Filter
Top Products
Simple setup
6
RQT7509
•
Use only supplied speakers
Using other speakers can damage the unit and sound quality will be
negatively affected.
•
Set the speakers up on an even surface to prevent them from
falling. Take proper precautions to prevent the speakers from falling
if you cannot set them up on an even surface.
Positioning for best effect
How you set up your speakers can affect the bass and the sound
field. Note the following points.
•
Place speakers on flat secure bases.
•
Placing speakers too close to floors, walls, and corners can result in
excessive bass. Cover walls and windows with a thick curtain.
•
Keep your speakers at least 10 mm (
13
/32”) away from the system for
proper ventilation.
•
To avoid damage to the speakers, do not touch the speaker cones if
you have taken the nets off.
Notes on speaker use
•
You can damage your speakers and shorten their useful life if you
play sound at high levels over extended periods.
•
Reduce the volume in the following cases to avoid damage.
–
When playing distorted sound.
–
When the speakers emit strange noise (howling) from a record
player, noise from FM broadcasts, or continuous signals from an
oscillator, test disc, or electronic instrument.
–
When adjusting the sound quality.
–
When turning the unit on or off.
If irregular coloring occurs on your television
These speakers are designed to be used close to a television, but
the picture may be affected with some televisions and set-up
combinations.
If this occurs, turn the television off for about 30 minutes.
The television’s demagnetizing function should correct the problem.
If it persists, move the speakers further away from the television.
Simple setup
Positioning
STEP1
Connecting the speakers
STEP2