Filter
Top Products
13
RQT6815
Disc operations
Discs—Basic play
[RAM] [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3] [JPEG]
Preparation
≥Press [Í] to turn on the unit.
≥Turn on the television and select the appropriate video input on the
television to suit the connections for the unit.
1 Press [1 DVD/CD] to select “DVD/CD”
as the source.
≥Press [∫] when a disc is in the tray.
≥If the disc contains both audio data (WMA and MP3) and
JPEG, check “Mixed Disc—Audio & Stills” setting in the
SETUP menu (➡ page 30). Select “Stills (JPEG)” to play
JPEG or “Audio (MP3/WMA)” to play WMA/MP3.
2 Press [< OPEN/CLOSE] to open the
disc tray and place the disc.
≥Remove TYPE 2 and 4 discs
from their cartridges before
use. [RAM]
≥Label-up (With double-sided
discs, load so the label for the
side you want to play is facing
up.)
Press [< OPEN/CLOSE] again to close and start play.
When a menu appears after inserting a HighMAT disc
➡ page 21
3 If play doesn’t start after step 2
Press [1 DVD/CD].
[CD] (CD text only) [WMA] [MP3]
Track information appears on the television. Press
[SUBTITLE] to turn the display on or off.
4 Adjust the volume.
∫ To pause play
Press [;] during play.
Press [1 DVD/CD] to restart play.
∫ To stop play
Press [∫] (➡ below, Resume function).
[Note]
≥If “$” appears on the television
The operation is prohibited by the unit or disc.
≥It may take some time for play to start but this is normal.
≥Multiple-channel signals are down-mixed to stereo (2-channel). (To
enjoy multi-channel surround sound ➡ page 33)
If “D.MIX” flashes on the display [DVD-A]
The DVD-Audio contains multiple-channel signals that cannot be
down-mixed.
[RAM] [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3] [JPEG]
During play
Press [SHIFT]r[P.MEMORY] to memorize
a position.
Press again to replace the position.
This position is saved even if you turn the unit off, change the source
or open the disc tray. When you turn the unit on, reselect “DVD/CD”
or reinsert the disc whose position you memorized, “RESUME” lights
on the display. Press [1 DVD/CD] to start play from the memorized
position. The position is cleared.
≥You can memorize positions on up to five different discs at a time.
When you memorize another position, the earliest position is
replaced.
“RESUME” lights on the display when the unit has recorded the
position at which you stopped play.
Press [1 DVD/CD] to start play from that position.
≥The position is cleared when you:
—Turn the unit off.
—Select another source or open the disc tray.
≥Press [∫] to clear the position.
[DVD-V]
The following message appears
immediately after you press [1 DVD/
CD] when “RESUME” is displayed.
Press [1 DVD/CD] while the message
is displayed and the beginning portions of each chapter up to the
current one are played.
Full play resumes from the point where you pressed [∫] or
[SHIFT]_[P.MEMORY].
(This feature works only within a title.)
If you do not press [1 DVD/CD], the message disappears and play
starts from where you pressed [∫] or [SHIFT]_[P.MEMORY].
PHONES
UPDOWN
AC IN
VOLUMETUNER/AUXDVD/CDPOWER
/
//
I
-
DEMO
OPEN/CLOSE
ADVANCED
SURROUND
Í
4
21,3
Í/I POWER
Í