Filter
Top Products
RQT6713
10
The radio: manual tuning
Preparation:
Press [TUNER BAND] to select “FM” or “AM”.
Automatic presetting
Do the following once each for FM and AM.
Preparation: Tune to the frequency where pre-setting is to begin.
Hold down [PROGRAM] until the frequency changes.
The tuner presets all the stations it can receive into the channels in
ascending order. When finished, the last station memorized is tuned in.
Manual presetting
Pre-set the stations one at a time.
1 Press [PROGRAM] then press [g, REW/3] or
[f, 4/FF] to tune to the desired station.
2 Press [PROGRAM] then press [g, REW/3] or
[f, 4/FF] to select a channel.
3 Press [PROGRAM].
The station occupying a channel is erased if another station is preset
in that channel.
Selecting channels
Press the numbered buttons to select the channel.
To enter channel 10 or over, press [
X
10], then the two digits.
OR
1 Press [PLAY MODE] to select “PRESET”.
2 Press [g, REW/3] or [f, 4/FF] to select the
channel.
The radio: preset tuning
Remote control only
There are two methods of pre-setting stations.
Automatic presetting : All the stations the tuner can receive are
preset.
Manual presetting : You can select the stations to preset and the
order they are preset in.
Up to 15 stations each can be set in the FM and AM bands.
1 Press [TUNER/BAND] to select band.
The unit comes on.
Every time you press the button:
FM ↔ AM
2 Press [PLAY MODE] on the remote control to select
“MANUAL”.
Every time you press the button:
MANUAL ↔ PRESET
3 Hold down [g/REW/3] or [f/FF/4] for a moment
to search for a station.
The frequency stops when it finds a clear station.
To stop during the process, press [g/REW/3] or [f/FF/4].
Under excessive interference, a station may not be found.
Press [g/REW/3] or [f/FF/4] repeatedly to tune step-by-
step.
“TUNED” is displayed when a radio station is tuned.
“ST” is displayed when a stereo FM broadcast is being received.
RDS broadcasting
SC-AK210 only
Remote control only
This unit can display the text data transmitted by the radio data system
(RDS) available in some areas.
If the station you are listening to is transmitting RDS signals, “RDS”
will light up on the display.
Displaying the name of a broadcasting station or a
program type
Press [CD/RDS DISP].
Every time you press the button:
Frequency display Station Name (PS) Program type (PTY)
❈
“M.O.R M”=“Middle of the road music”
Notes
•
RDS displays may not be available if reception is poor.
•
Sound is momentarily interrupted if you load/unload tapes while
listening to an AM broadcast.
If noise is excessive in FM
Remote control only
Hold down [PLAY MODE] to display “MONO”
.
Monaural sound is selected and noise reduces when reception is
weak.
Hold down [PLAY MODE] again to cancel the mode.
“MONO” is also cancelled if the frequency is changed.
SLEEPSLEEP
CLOCKCLOCK
TIMER TIMER
PLPLAY
REC
REC
AUTO OFFUTO OFF
DISCDISC
PROGRAMPROGRAM
S.SOUND EQS.SOUND EQ
PRESET EQPRESET EQ
MUTINGMUTING
REWREW
CLEARCLEAR
CD DISPCD DISP
DIMMERDIMMER
PLAY MODEPLAY MODE
FFFF
1
2 3
4
5 6
7
8 9
0
1010
CDCD
AUXAUX
TUNERTUNER
BANDBAND
TAPETAPE
VOLVOL
VOLVOL
SLEEP
SLEEP
CLOCK
CLOCK
TIMER
TIMER
PL
PL
AY
REC
REC
AUTO OFF
UTO OFF
DISC
DISC
PROGRAM
PROGRAM
S.SOUND EQ
S.SOUND EQ
PRESET EQ
PRESET EQ
MUTING
MUTING
REW
REW
CLEAR
CLEAR
CD DISP
CD DISP
DIMMER
DIMMER
PLAY MODE
PLAY MODE
FF
FF
1
2 3
4
5 6
7
8 9
0
10
10
CD
CD
AUX
AUX
TUNER
TUNER
BAND
BAND
TAP E
TAPE
VOL
VOL
VOL
VOL
2
1
3
3
CD/RDS
DISP
COUNTRY
NATIONAL
OLDIES
FOLK M
DOCUMENT
TEST
ALARM
FINANCE
CHILDREN
SOCIAL A
RELIGION
PHONE IN
TRAVEL
LEISURE
JAZZ
NEWS
AFFAIRS
INFO
SPORT
EDUCATE
DRAMA
CULTURE
SCIENCE
VARIED
POP M
ROCK M
M.O.R M
❈
LIGHT M
CLASSICS
OTHER M
WEATHER
Program type displays
SC-AK110
SC-AK210SC-AK310
SC-AK110
SC-AK210SC-AK310