Filter
Top Products
RQT7528
7
1 Press [c, OPEN/CLOSE] to open the tray.
The unit comes on.
2 Set a CD in the tray. (Label must face upward.)
To continue loading CDs in the other trays
Press [1]–[5] to select the required tray and press [c, OPEN/
CLOSE] to open the tray.
Press [c, OPEN/CLOSE] to close the tray.
3 Press [1]–[5] to play your desired disc.
(Alternatively, you can press [:/J, CD] if the current disc is your
desired CD.)
The track number and its elapsed playing time are shown.
Use the CD Play Mode function’s ALL-DISC mode to play CDs in
succession. (A page 8)
To stop the disc play
Press [L, STOP].
One touch play
During standby mode and when a CD is loaded, press [:/J, CD] or
[1] – [5].
The unit comes on and play starts.
To pause Press [:/J, CD] during play.
Press again to resume play.
To search forward/ Hold down [g/REW/3] (backward)
backward or [f/FF/4] (forward) during play or pause.
Note
•
CD
During 1-RANDOM or A-RANDOM play (A page 8), you
cannot skip to tracks already played.
•
During program play (A page 8), 1-RANDOM or A-RANDOM play,
you can search only within the track.
•
You cannot use search function for MP3 files.
•
Always stop the changer before loading or changing CDs. You
cannot change CDs while a disc is playing.
L
MP3
Display when in the stop mode (example)
File format indicator
“MP3”: Indicates the disc contains MP3 files
Track skip play
CD
MP3
During play or stop
Press [
g/REW/3]
or
[f/FF/4] to select the desired
track.
When selecting in the stop mode
Example:
MP3
Press [:/J, CD] to start play.
Play starts from the selected track.
MP3
To play from another album, refer to “Album skip play”. (A see
right)
CDs
Current disc indicator
Basic play
CD
MP3
Album skip play
MP3
Remote control only
During play or stop
Press [ALBUM ( or )] to select the desired album.
When selecting in the stop mode (example):
Press [:/J, CD] to start play.
Play starts from the first track of the selected album.
To play from another track, refer to “Track skip play”. (A see left)
CD display
CD
MP3
During play or pause
Press [
DISP, –DEMO]
(remote control: Press [CD DISP])
to select a desired CD display mode.
Every time you press the button:
CD
Elapsed play time ↔ Remaining play time
MP3
a Remaining → b Album title → c Track title
play time
g Elapsed ← f ID3 artist ← e ID3 title ← d ID3 album
play time name name name
↓
↑
Note
CD
•
When track number 25 or greater is playing, remaining play time
display shows “– –:– –”.
MP3
•
When a title is longer than 8 characters, it will scroll across the
display. If you selected a mode from b - f (see above), the
scrolling will start again after every 3 seconds.
•
“NO ID3” is displayed if titles with ID3 tags haven’t been entered.
•
Maximum number of displayable characters:
Album/track title: 31
ID3 album/title/artist name: 30
(ID3 is a tag embedded in MP3 track to provide information about
the track.)
•
This unit can display album and track titles with ID3 tags (version
1.0 and 1.1). Titles containing text data that the unit doesn’t support
cannot be displayed.
•
Titles entered with 2-byte code cannot be displayed correctly on this
unit.
Starting play from a specific track
CD
MP3
Remote control only
1 Press [DISC] and (within 10 seconds) [1]–[5] to select the
disc, then press [L, CLEAR].
2
MP3
Press [ALBUM ( or )] and then the numbered
buttons to select the album.
To select album 10 or over, press [
X
10] once then the two digits.
To select album 100 or over, press [
X
10] twice then the three digits.
Play starts from the first track of the selected album.
3 Select the track with the numbered buttons.
To select track 10 or over, press [
X
10] once then the two digits.
MP3
To select track 100 or over, press [
X
10] twice then the three
digits.
Play starts from the selected track.
Note
CD
You cannot use this function with 1-RANDOM or A-RANDOM
mode.
Total number of tracks
(on the current disc)
File format indicator
Current album Current track
Current album
Number of tracks
in current album
Example:
a
Remaining play
time
Total number of albums
(on the current disc)