Filter
Top Products
– 2 –
Installing the battery
Insert the battery (1) and press it down until it snaps into the compartment (2).
Close the cover.
Charging the battery
Place the handset on the charger and
charge for 6 hours before initial use.
Repeat charging will require approximately
the same amount of charging time (6 hours)
if the battery is depleted completely.
• The unit beeps once, the CHARGE indicator
lights and “Charging” is displayed.
• When the battery is fully charged, “Charge
completed” is displayed if there are no new
calls in the Caller List.
• Recharge the battery when:
—“Recharge battery” is displayed on the
handset,
—“
3” flashes, or
— the handset beeps intermittently while it is in use.
• If the battery has been discharged, the handset will display “Charge for 6 HRS” and
“
4” when you place the handset on the charger. The handset will not work unless the
battery is charged. Continue charging.
Handset battery information
After your Panasonic battery is fully charged, you can expect the following performance:
• Clean the charge contacts of the handset and the charger with a soft, dry cloth
once a month. Clean more often if the unit is subject to grease, dust or high
humidity, otherwise, the battery may not charge properly.
Operation Operating time
While in use (TALK) Up to 5 hours
While not in use (Standby) Up to 11 days
While using the Clarity Booster feature Up to 3 hours
1
2
Charge Contacts
CHARGE Indicator
TGA520CE.fm Page 2 Monday, April 5, 2004 6:15 PM