Panasonic CQ-C1103U CD Player User Manual


 
Accessories
Operating Instructions
(English: YFM284C487CA)
(Français: YFM284C488CA)
(Español: YFM284C489CA)
Q'ty: 1 set
Installation Instructions
(YFM284C490CA)
Q'ty: 1
Owners Information Card
Q'ty: 1
Lock Cancel Plate
Q'ty: 2
Mounting Bolt
Q'ty: 1
Rubber Bushing
Q'ty: 1
Mounting Collar
(FX0214C384ZA)
Q'ty: 1
Trim Plate
(YFC054C079YA)
Q'ty: 1
Power Connector
(YGAJ021012)
Q'ty: 1
Notes:
¡The number in parentheses underneath each accessory part name is the part number for maintenance and service.
¡Accessories and their part numbers are subject to modification without prior notice due to improvements.
¡Mounting Collar and Trim Plate are mounted on the main unit at shipment.
Specifications
YFM284C487CA PTW1205-1 Printed in China(Y)
Panasonic Consumer Electronics
Company, Division of Panasonic
Corporation of North America
One Panasonic Way, Secaucus,
New Jersey 07094
http://www.panasonic.com
Panasonic Sales Company,
Division of Panasonic Puerto
Rico, Inc. (“PSC”)
Ave. 65 de Infanteria, Km. 9.5
San Gabriel Industrial Park,
Carolina, Puerto Rico 00985
http://www.panasonic.com
Panasonic Canada Inc.
5770 Ambler Drive,
Mississauga, Ontario
L4W 2T3
http://www.panasonic.ca
General
Power supply :12 V DC (11 – 16 V DC), test voltage
14.4 V, negative ground
Current consumption :Less than 2.2 A (CD mode; 0.5 W x
4 channels)
Maximum power output :50 W x 4 channels (at 1 kHz), vol-
ume control maximum
Tone adjustment range :Bass: ±12 dB at 100 Hz,
Treble: ±12 dB at 10 kHz
Suitable speaker impedance :4 – 8
Pre-amp output voltage :2.5 V (CD mode, 1 kHz, 0 dB)
Output impedance :200
Dimensions (W x H x D) :178 x 50 x 155 mm
{7" x 1 15/16" x 6 2/16"}
Weight :1.3 kg {2 lbs. 14 oz}
Disc Player
Sampling frequency :8 times oversampling
DA converter :1 bit DAC System
Pick-up type :Astigma 3-beam
Light source :Semiconductor laser
Wave length :790 nm
Frequency response :20 Hz – 20 kHz (±1 dB)
Signal to noise ratio :96 dB
Total harmonic distortion :0.01 % (1 kHz)
Wow and flutter :Below measurable limits
Channel separation :75 dB
FM Stereo Radio
Frequency range :87.9 MHz – 107.9 MHz
Usable sensitivity :11.0 dBf. (75 )
50 dB quieting sensitivity :15.2 dBf. (75 )
Frequency response :30 Hz – 15 kHz (±3 dB)
Alternate channel selectivity :75 dB
Stereo separation :35 dB (1 kHz)
Image rejection ratio :55 dB
IF rejection ratio :100 dB
Signal/noise ratio :62 dB
AM Radio
Frequency range :530 kHz – 1 710 kHz
Usable sensitivity :28 dB/µV (S/N 20 dB)
Above specifications comply with EIA standards.
Notes:
¡Specifications and design are subject to modification without
notice due to improvements.
¡Some figures and illustrations in this manual may be different
from your product.
Power Output:
18 W RMS x 4 Channels at 4 and 1%
THD+N
Signal to Noise Ratio:
85 dBA (reference: 1 W into 4 )
Installation kit (ZZBISC1101U-J)
© 2005 Matsushita Electric Industrial Co., Ltd. All Rights Reserved.