Filter
Top Products
2 © 2009 Directed Electronics—All rights reserved.
SINGLE ENCLOSURE WIRE CONNECTION GUIDE
The following diagram shows a standard connection to a mono amplifier or single
channel of a multi-channel amplifier.
NOTE: Refer to your amplifier owner’s manual before connecting the subwoofer
enclosure system.
Subwoofer Enclosure System
+
-
+
Amplifier
STANDARD
AMPLIFIER CONNECTION
4 ohm
load
-
SPECIFICATIONS
Feature CO104SBX CO124SBX
Frequency response 35 Hz – 250 Hz 25 Hz – 250 Hz
Power handling (rms) 200 watts x 1 200 watts x 1
Power handling peak 400 watts x 1 400 watts x 1
Box Impedance 4 ohms x 1 4 ohms x 1
Efficiency (1W/1M) 86 dB 87 dB
Woofer size (inches) 10” 12”
Number of woofers 1 1
Enclosure type slot vented slot vented
Typical output level @ full power 114 to 123 dB 117 to 126 dB
Depth x Width x Height (inches) 15.47" x 15" x 12.44" 15.98" x 17" x 14.17"
Weight 25 lb (11.5 kg) 27 lb (12.5 kg)