Three Channel Bridged Stereo Configuration
● Front and rear channels are configured for bridged two-channel operation
● Lowest recommended impedance for both front and rear channels is 4W
● Crossover and gain configurations are independently adjustable between the
front, rear, and subwoofer channels.
● Two-channel operation is recommended for this operational mode.
● Front and rear outputs can be configured for high-pass, low-pass, band-pass, or
full range operation.
● Front and rear outputs can be configured for stereo (right channels will have right
output, left channels will have left output) or summed two-channel operation
(front speaker bridged, rear speaker bridged).
● Lowest recommended impedance for the subwoofer channel is 2W.
● The subwoofer channel can use internal or external input. If the source unit has a
separate subwoofer out, use the external input configuration.
11
©2003 Directed Electronics, Inc.