Filter
Top Products
END PANEL LAYOUT
1. Power LED - when lit indicates that the amplifier is on.
2. Stereo/Mono Switch - configures the amplifier for one or two inputs.
3. RCA Inputs - accepts RCA input from a source unit, preamplifier, or equalizer.
4. Gain Control - continuously adjusts from 200mV to 5V for full power output.
5. High-Level Input Connector - accepts input from head unit's speaker output.
6. Crossover Switch - configures the front channel for high-pass, low-pass, or full
range operation.
7. INTELLi Bass Control - continuously adjusts from 0 to 10dB of boost centered at
45Hz.
8. Speaker Connections - accepts up to 12-gauge speaker wire.
9. 1 ATC Fuse - protects the amplifier from over current situations.
10. REM Remote Turn-on Input - turns on the amplifier when fed 12 V+.
11. Power Connections - accepts greater than 8 AWG power and ground cables.
5
©2003 Directed Electronics, Inc.