Filter
Top Products
9
1. Set the adapter’s voltage switch to 3V.
2. Put the adapter’s 3.4 mm outer diameter/1.3 mm
inner diameter barrel plug into the adapter’s
cord, with the tip set to negative (–TIP).
3. Insert the plug into the SCP-96’s
DC 3V
jack.
4. Plug the adapter into a standard AC outlet.
Note:
Connecting the AC adapter automatically dis-
connects internal batteries.
Using Vehicle Battery Power
To power the SCP-96 from your vehicle’s battery,
you need a DC adapter, such as Cat. No. 270-1560
or 273-1810.
Cautions:
• You must use a DC adapter that supplies at
least 3 volts DC power and delivers at least 200
milliamps. Its center tip must be set to negative,
and its barrel plug must properly fit the SCP-96’s
DC 3V
jack. The recommended adapter meets
these specifications. Using an adapter that does
not meet these specifications could damage the
SCP-96 or the adapter.
14-1242.fm Page 9 Friday, July 2, 1999 12:04 PM