Filter
Top Products
11
CLEANING THE TAPE-HANDLING
PARTS
Dirt, dust, or particles of the tape's coating can accumulate on
the tape heads and other parts that the tape touches. This
can greatly reduce the performance of the SCP-104. Follow
these steps to clean the tape-handling parts after every 20
hours of operation.
1. Remove the batteries.
2. Open the cassette compartment door.
3. Press
PLAY
to expose the tape-handling parts.
4. Use a cotton swab dipped in denatured alcohol or tape
head cleaning solution to clean the play head, pinch
roller, capstan, and tape guides.
5. When you finish cleaning, press
STOP
and close the cas-
sette compartment door. Then reinstall the batteries.
Your local RadioShack store carries a full line of cassette
player cleaning supplies.
Playback Head
Tape Guide
Tape Roller
Capstan
14-1256.fm Page 11 Thursday, July 8, 1999 2:22 PM