Filter
Top Products
8
Using AC Power
You can power the SCP-103 using a 3V, 300 mA AC adapter
and a size H Adaptaplug
®
(neither supplied). Both are avail-
able at your local RadioShack store.
Cautions:
You must use a Class 2 power source that sup-
plies 3V DC and delivers at least 300 mA. Its
center tip must be set to positive and its plug
must fit the SCP-103's
DC 3V
jack. Using an adapter that
does not meet these specifications could damage the
SCP-103 or the adapter.
• Always connect the AC adapter to the SCP-103 before
you connect it to AC power. When you finish, disconnect
the adapter from AC power before you disconnect it from
the SCP-103.
Follow these steps to connect an AC adapter to the SCP-103.
1. Set the adapter's voltage switch to 3V.
2. Insert the Adaptaplug into the AC
adapter's socket. Line up TIP on
the plug with +POS on the socket.
3. Insert the barrel plug into the
SCP-103's
DC 3V
jack.
4. Plug the AC adapter into a stan-
dard AC outlet.
!
14-1255.fm Page 8 Tuesday, July 27, 1999 10:47 AM