Filter
Top Products
5
Follow these steps to install batteries.
1. Press and slide the battery compartment cover in the
direction of the arrow until it stops.
2. Lift the curved edge of the cover.
Caution: The battery compartment cover is hinged
and cannot be removed.
3. Place the batteries in the compartment and on top of
the attached ribbon, as indicated by the polarity sym-
bols (+ and –) marked on outside the compartment.
4. Close the cover.
When the sound gets distorted or weak, or the SCP-101
stops operating properly, replace the batteries.
Warning: Dispose of old batteries promptly and properly.
Do not burn or bury them.
Caution: If you do not plan to use the SCP-101 with bat-
teries for a week or more, or if you plan to use only stan-
14-1253.fm Page 5 Tuesday, July 27, 1999 12:50 PM