Filter
Top Products
10
TAPE TIPS
Recommended Tapes
Tape quality greatly affects the quality
of the recording. We recommend ex-
tended-range or low noise Type 1 reg-
ular length (60- or 90-minute) normal-
bias cassette tapes. We do not recom-
mend long-play cassette tapes such as
C-120s because they are thin and can
easily tangle.
Erasing a Cassette Tape
To record over a cassette tape, simply
record as usual. The cassette deck
records over the previous recording.
To erase the entire cassette tape, in-
sert the supplied erasing plug into the
MIC jack and press RECORD. (Be sure
you have not connected anything to
the
AUX jack.)
If you need to erase an entire cassette,
you might prefer using a bulk tape
eraser, available at your local
RadioShack store.
Preventing Accidental
Erasure
Cassette tapes have two erase-protec-
tion tabs — one for each side. When a
tab is in place, you can record on that
side.
To protect a recording from being acci-
dentally recorded over or erased, use
a screwdriver to remove one or both of
the cassette tape’s erase-protection
tabs. This prevents
RECORD from be-
ing pressed.
If you later decide to record on a tape
side after you have removed its erase-
protection tab, place a piece of strong
plastic tape over that side’s erase-pro-
tection hole. Be sure you cover only
the hole originally covered by the
erase-protection tab.
Caution:
Removing the erase-protec-
tion tabs does not prevent a bulk eras-
er from erasing a cassette tape.
DC IN 6V
AUX
EAR
REM
MIC
VOLUME
A
Side A Tab
A
14-1115.fm Page 10 Friday, January 8, 1999 10:31 AM