Filter
Top Products
TV
HDMI
IN
TV
VIDEO 1
IN
HDMI
OUT
Antenna input
(e.g., RF IN)
Cable/
satellite
receiver
Cable/satellite
receiver
VIDEO
OUT
AUDIO
OUT
L
R
DIGITAL
OUT
COAXIAL
Antenna input
(e.g..RF IN)
DVD player
VIDEO
OUT
AUDIO
OUT
DIGITAL
OUT
COAXIAL
L
R
HDMI
OUT
DVD/BD player
AV Component Hookup
IF NO HDMI
Please ensure the monitor input
(VIDEO 1, VIDEO 2, VIDEO 3, etc.)
selected corresponds to actual
connection used.
See the other side of this sheet for the Speaker hookup.
With an HDMI cable you can send both audio and video with a single cable,
making connecting simple and keeping wires neat.
If you have an HDMI-compatible TV and players, you can connect them
to the AV receiver with HDMI cables. Digital audio signals received
at HDMI IN input are output by the speakers and headphones connected
to the AV receiver.
Coaxial feed from
TV antenna
If you are not using
cable/satellite receiver,
please refer to the
instruction manual.
Coaxial feed from
TV antenna
If you are not using
cable/satellite receiver,
please refer to the
instruction manual.
If your TV or player doesn’t support HDMI, use the analog or digital
connections shown below.
Using the HDMI Inputs
If there’s no picture on your TV, you’ll need to
assign the HDMI inputs as necessary using the
onscreen setup menus.
If you connect your DVD/BD player to the AV
receiver’s HDMI IN 1, and connect
your cable/satellite receiver to HDMI IN 3,
as shown above, it’s not necessary to change
the default assignments.
Using the Digital Inputs
If there’s no sound, you’ll need to assign the
digital inputs as necessary using the setup
menus on the AV receiver’s display.
If you connect your DVD player to the AV
receiver’s DIGITAL IN COAXIAL 1, and your
cable/satellite receiver to the DIGITAL IN
COAXIAL 2, as shown, it’s not necessary to
assign the digital input.
The onscreen setup menus appear only on a TV that is connected to the HDMI OUT. If your TV
is connected to the MONITOR OUT or the COMPONENT VIDEO OUT, use the AV receiver’s
display when changing settings.
On the front panel On the front panel
1–1. HDMI Input
DVD/BD
VCR/DVR
CBL/SAT
GAME
AUX
HDMI 1
HDMI 2
HDMI 3
HDMI 4
FRONT
1. Input Assign
1. HDMI Input
2. Component Video Input
3. Digital Audio Input
Menu
1. Input Assign
2. Speaker Setup
3. Audio Adjust
4. Source Setup
5. Listening Mode Preset
6. Miscellaneous
7. Hardware Setup
8. Remote Controller Setup
9. Lock Setup