Onkyo TX-SR502 Stereo Receiver User Manual


 
37
Using the Tuner
—Continued
You can store up to 30 of your favorite radio stations as
presets.
When the input source is AM or FM:
When tuned to an RDS radio station broadcasting PS
information (European models only):
*This information is displayed for about five seconds,
then the previously displayed information reappears.
Presetting Radio Stations
1
Tune into the station that you
want to store as a preset.
2
Press the [MEMORY] button.
The MEMORY indicator appears and
the preset number flashes.
3
While the MEMORY indicator is
displayed (about 8 seconds), use
the PRESET [ ]/[ ] buttons to
select a preset from 1 through 30.
In this example, preset #3 is selected.
4
Press the [MEMORY] button
again to store the station.
The station is stored and the preset
number stops flashing.
Repeat this procedure for all of your
favorite radio stations.
Selecting Preset Stations
1
Use the [TUNER] input selector
button to select either AM or FM.
2
Use the PRESET [ ]/[ ] but-
tons, or the remote controller’s
CH [+/–] button to select the pre-
sets.
TUNING MODE
MEMORY
CLEAR
PRESET
TUNING MODE
MEMORY
CLEAR
TUNER
PRESET
Deleting Presets
1
Select the preset that you want to
delete.
See the previous section.
2
While holding down the [MEM-
ORY] button, press the
[TUNING MODE] button.
The selected preset is deleted and its
number disappears from the display.
Displaying Radio Information
1
Press the [DISPLAY] button
repeatedly to cycle through the
available information.
TUNING MODE
MEMORY
CLEAR
DISPLAY
Band, frequency
& preset #
Band &
listening mode
Station name
& preset #
Band, frequency
& preset #*
Band &
listening mode