Filter
Top Products
Remote Controller
To control the AV receiver, press RECEIVER to select
Receiver mode.
a
Sets the AV receiver to On or Standby.
b
Selects the remote controller modes or the input sources
.
c
Selects and adjusts settings
.
d
Accesses the quic
k setup menus.
e
Selects listening modes.
f
Adjusts the displa
y brightness.
g
Mutes or unm
utes the AV receiver.
h
Displa
ys various information about the currently selected
input source.
i
Adjusts the v
olume.
j
Retur
ns to the previous menu.
k
Accesses the HOME men
u.
l
Used f
or the Sleep function.
6. Troubleshooting
Can’t turn on the AV receiver.
Make sure that the power cord is properly plugged into the wall outlet.
The AV receiver turns off unexpectedly.
The AV receiver will automatically enter standby mode when Auto Standby is set
and launched.
There’s no sound, or it’s very quiet.
Make sure that the proper digital source is selected.
There’s no picture.
Make sure that all video connecting plugs are pushed in all the way.
If you can’t resolve the issue yourself, try resetting the AV receiver before
contacting your Onkyo dealer.
To reset the AV receiver to its factory defaults, turn it on and, while holding
down CBL/SAT, press
8
ON/STANDBY. “Clear” will appear on the
AV receiver’s display and the AV receiver will enter standby mode.
Note that resetting the AV receiver will delete your radio presets and
custom settings.
http://www.onkyo.com/
Tel: 800-229-1687, 201-785-2600
http://www.us.onkyo.com/
Tel: +49-8142-4401-0
http://www.eu.onkyo.com/
Tel: +44-(0)8712-00-19-96
Tel: 852-2429-3118
http://www.hk.onkyo.com/
(Hong Kong)
(Mainland)
Tel: 86-21-52131366
http://www.cn.onkyo.com/
- 7 -
5.
Getting to Know the AV receiver
Front Panel
(North American and Taiwanese models)
(European, Australian and Asian models)
Each input selector button (BD/DVD, GAME, etc.)
selects the input terminal with the same name on
the rear panel.
Note that these default assignments can be
changed. For details, please refer to the
instruction manual.
a
Sets the AV receiver to On or Standby.
b
Selects Zone 2.
c
The remote control sensor receives signals from the
remote controller.
d
Displa
ys various information.
e
Selects listening modes.
f
(North American and Taiwanese models)
DIMMER: Adjusts the display brightness.
g
Stores or deletes radio presets.
h
Selects the Auto or Manual tuning mode.
i
Displays various information about the currently selected
input source.
j
Accesses the HOME menu.
k
When the AM or FM input source is selected,
w
TUNING
q
are
used to tune the tuner, and
e
PRESET
r
are used to select
radio presets.
When used with onscreen menus, they work as cursor buttons
to select and set items. ENTER is also used with
onscreen menus.
l
Returns to the previous menu.
m
Adjusts the volume.
n
(North American and Taiwanese models)
The Music Optimizer function enhances the sound quality of
compressed music files.
o
Connects a standard pair of stereo headphones.
p
Adjusts the tone.
q
Selects the input sources.
r
Connects a camcorder or similar for audio/video playback.
s
Connects a USB storage or portable player for playback of
music files.
t
Connects the speaker setup microphone.
u
By way of optimized circuitry, this function reduces power
consumption when the AV receiver is in standby mode.
v
(European, Australian and Asian models)
Selects the Pure Audio listening mode.
The indicator lights when this mode is selected.
w
(European, Australian and Asian models)
RT/PTY/TP: Used for RDS (Radio Data System)
RDS works only in areas where RDS broadcasts are available.