Filter
Top Products
En-
5
Connections
For safety considerations, turn off the power to this unit
and all other system components before you connect or
disconnect any component.
When using the SL-107 in conjunction with an AV
amplifier or receiver that features surround capability,
connect the SL-107 to SUBWOOFER PREOUT jack
using the supplied pin connector cable. If you use
speaker cable to make the connection, depending on the
amplifier or receiver settings, the bass signals may cut
out, resulting in decreased fidelity in the low bass range.
For more information on proper connection procedures,
refer to the instruction manual supplied with your ampli-
fier or receiver.
Connecting to an amplifier’s SUBWOOFER
PREOUT jack
If your amplifier (or receiver) is equipped with SUB-
WOOFER PREOUT jack, connect it to the SL-107’s left
LINE INPUT jack.
Connecting two channel outputs (when your ampli-
fier does not have SUBWOOFER PREOUT jack):
If your preamplifier is equipped with two channel out-
puts, connect them to the right and left LINE INPUT
jacks on the SL-107.
Using the SL-107 with an AV amplifier
ONOFF
POWER
PHASE
NOR
REV
OUTPUT LEVEL
FREQUENCY
LR
(
MONO
)
L
R
L
R
INPUT OUTPUT
FROM
AMP/RECEIVER
TO
SPEAKERS
LINE
INPUT
SPEAKER
LEVEL
SL-107
Amplifier with SUBWOOFER PREOUT jack
(Supplied)
ONOFF
POWER
PHASE
NOR
REV
OUTPUT LEVEL
FREQUENCY
LR
(
MONO
)
L
R
L
R
INPUT OUTPUT
FROM
AMP/RECEIVER
TO
SPEAKERS
LINE
INPUT
SPEAKER
LEVEL
SL-107
L
R
PREOUT
Preamplifier / Pre-main amplifier
To power amplifier
(Not supplied)