Filter
Top Products
En-7
Main unit
For detailed information, see the pages in parentheses.
a (Power) button
Switches ON/Standby of the power alternately.
When the power is ON, the power indicator
lights up in white color.
b (3D SOUND) button
Switches 3D sound effect in the order shown
below:
c (BLUETOOTH) button, Bluetooth indicator
( page 12)
Activates Bluetooth input, switches Bluetooth
ON/OFF or activates Bluetooth pairing mode.
dVOLUME +/- button
Controls sound volume. White operation indica-
tor flashes during operation, and flashing stops
when volume reaches minimum or maximum.
eiPod/iPhone dock ( page 11)
Connects with iPod or iPhone.
fLight receiving area for remote controller
gPower/ Operation indicator
White: Power ON, White (dark): Charging
iPod/iPhone (Standby), Off: Standby
Orange: Bluetooth standby
During the power is ON, when each button is
pressed, white indicator turns off for a short
time (flashes in case of VOLUME +/- button). As
for button, indicator flashes as follows:
NORMAL: Flashes once ENHANCE: Flashes 2
times VOCAL: Flashes 3 times
For detailed information, see the pages in parentheses.
aPOWER SUPPY terminal ( page 8)
USB Power terminal (5 V/ 2.1 A).
This terminal is only for power supply; it cannot
be used for playing sound.
bLINE IN terminal ( page 13)
Connected with a sound output of an external
device with a commercially-available stereo
mini-plug audio cable.
cDC IN terminal ( page 8)
Connected with the attached AC adapter.
Top panel and front panel
1 2
5
34
7
6
NORMAL ENHANCE VOCAL
Rear Panel
1 2 3