Filter
Top Products
52
Operating your programmed remote controller
Numeric keys
HOME THEATER CONTROLLER
RC
-
440M
ON
STDBY
ENTER
MUTING
CABLE MODE
CH
VOL
CABLE MODE (Cable Tuner Mode)
1. Press the CABLE MODE button.
The CABLE button lights green.
2. Press the desired operation button.
The buttons shaded in the figure to the left are the operation
buttons that can be used to control your cable tuner unit.
The buttons given below have operations programmed
into them.
ON: Turns on and off the cable tuner unit (same as STDBY button
on the remote controller)
CH : Moves up and down the preset channel numbers
0,1 to 9: Numeric keys
ENTER: Confirm
You may also use the following buttons:
VOL : Adjusts the volume at the TX-DS696
MUTING: Activates the muting function at the TX-DS696
Numeric keys
ENTER/Cursor
button
HOME THEATER CONTROLLER
RC
-
440M
ON
STDBY
MENU
ENTER
MUTING
SAT MODE
CH
VOL
SAT MODE (Satellite Tuner Mode)
1. Press the SAT MODE button.
The SAT button lights green.
2. Press the desired operation button.
The buttons shaded in the figure to the left are the operation
buttons that can be used to control your satellite tuner unit.
The buttons given below have operations programmed
into them.
ON: Turns on and off the satellite tuner unit (same as STDBY button
on the remote controller)
CH : Moves up and down the preset channel numbers
: Moves the cursor
ENTER: Confirms the selection
MENU: Displays the menu
0,1 to 9: Numeric keys
ENTER: Confirm
You may also use the following buttons:
VOL
: Adjusts the volume at the TX-DS696
MUTING: Activates the muting function at the TX-DS696
DVD MODE (DVD Player Mode)
Buttons with programmed usage and operations are the same as the
operational buttons on page 48.
After performing the procedure given above, the following
modes become enabled for use.