Onkyo LS-T30 Speaker System User Manual


 
9
Listening to TV
Basic operations
1. Turn on the TV.
Auto Power On is turned on by default, and
so power to the unit turns on automatically.
The input source automatically switches to
TV, and audio from the TV is played.
0 The input source switches to TV, and the
input source indicator lights in white.
To adjust the volume of this unit
Allows to adjust the volume by 1 step in the 0 to
35 range.
1. Press VOLUME i/j.
The status indicators (white) indicate the
volume level.
Volume: “Middle”
To adjust the subwoofer level
Allows to adjust the subwoofer level by 1 step in
the j10 to i10 range while listening to the
sound. The default setting is 0. Also, the
subwoofer level is set to individual levels for
each different SOUND MODE.
1. Press SUBWOOFER i/j.
The status indicators (white) indicate the
subwoofer level.
Volume: “Standard”
To mute the sound
1. Press MUTING.
The status indicator flashes when the audio is
muted. Press again to cancel muting. Muting
will also be canceled when the volume is
changed or the power is turned off and on.
0 When using buttons on the unit, press
and at the same time. Press again to
cancel muting.
To cancel Auto Power On: press and hold
on the unit, and then press and hold
while continuing to press
. The input
source indicator flashes twice (white) to
indicate that this setting is now off.
0 Repeating this procedure switches
between on/off. The indicator flashes
once to indicate that this setting is now
on.
0 When this setting is off, press to turn
on the power to the unit, and then press
to switch the input source to TV.
LS-T30_mst.book 9 ページ 2014年8月21日 木曜日 午後1時5分