Filter
Top Products
19
Playing CDs—Continued
When Operating Directly on DX-7355
1. While playback is stopped, press the Stop [ ] button
to display “ROOT” on the display.
The DX-7355 enters Navigation mode.
2. Press the Play [ ] button to display the first group
name in ROOT.
3. Press the Previous and Next [ ]/[ ] buttons to
select a group.
4. Press the Play [ ] button.
Repeat steps 3 and 4 to select the tracks and sub-
groups in that group.
5. Press the Previous and Next [ ]/[ ] buttons to
select a track.
• To move up a level, press the Stop [ ] button.
6. Press the Play [ ] button to start playback.
Selecting Tracks in All Group Mode
In All Group mode, you don’t have to navigate the group
hierarchy because all groups that contain tracks appear at
the same level.
If any of random playback, memory playback, or
1-group playback mode is currently selected, press the
[PLAY MODE] button to cancel the mode before pro-
ceeding.
When Operating Directly on DX-7355
1. While playback is stopped, press the Stop [ ] button
for about 2 seconds until “1-” appears on the display.
The DX-7355 enters All Group mode.
2. Press the Previous and Next [ ]/[ ] buttons to
select a group.
3. Press the Play [ ] button.
4. Press the Previous and Next [ ]/[ ] buttons to
select a track.
• To move up a level, press the Stop [ ] button.
5. Press the Play [ ] button to start playback.
1
While playback is stopped, press
the [ ] button.
The DX-7355 enters All Group mode,
and “1-” appears on the display.
2
Use the [ ]/[ ] buttons to select
the other groups.
You can select any group that contains
tracks.
To play the first track in the selected
group, go to Step 4.
3
Press the [ ] button.
The first track name inside the group is
displayed.
Use the [ ]/[ ] buttons to select the
tracks within the group.
,,,
ENTER
MP3
GROUP
MP3
GROUP TRACK
• To select another group, press the
[ ] button again, and then use the
[]/[] buttons to select it.
• To cancel the procedure at any point,
press the Stop [ ] button.
To Select Groups and Tracks by
Number
1. Use the number buttons as shown
in the examples below to enter
group numbers.
If playback is stopped, playback
starts with the first track in the
specified group.
2. Use the number buttons to enter the
track number.
The playback starts.
If a group contains more than 99
tracks, single- and double-digit
track numbers must be preceded by
zeros. For example, to specify
track #8, press [8]. To specify track
#34, press [>10], [10/0], [3], and
[4]. To specify track #134, press
[>10], [1], [3], and [4].
4
To start playback, press the
[ENTER] or Play [ ] button.
Playback will start with the specified
track or group and continue until all of
the track on the disc have been played.
To select: Press:
Track #8
Track #10
Track #34
Used to enter numbers over 10.