Filter
Top Products
vii
Locations where the Reader/Writer is exposed to dust, corrosive gas, saline, or flammable
gas.
Locations where the Reader/Writer is exposed to direct heat.
Locations subject to condensation due to high humidity.
Locations subject to vibration or impact that exceed the limits outlined in the
specifications.
Locations where the device may be exposed to water, oil, or chemical agents. (This
applies to the models other than waterproof types.)
Outdoor
Be sure to tighten the devices screws securely.
z Failure to do so may result in personal injury or device damage.
Cables with screw attachments must be secured before use.
z Failure to do so may damage the device.
Use the spcified-size cables.
z
Failure to do so may result in electric shock or fire.
To avoid interferences with other systems, adhere to the following items and check
them before using the product.
z The product uses a publicly available ISM frequency band of 13.56MHz to communicate with
Tags. Some transceivers, motors, monitoring devices, power supplies (power supply ICs), and
other similar RFID systems may generate noise, which cause radio interference and may affect
communication with Tags. If the product is required in the vicinity of these items, check for any
interferences prior to use.
z On the contrary, the system itself may affect radio station transmissions or medical devices. Be
cautious when using the system in the environments where such effects might occur.
z To minimize noise effects, adhere to the following:
Establish a Class D grounding (former Class 3 grounding) for metal objects placed in the
vicinity of the system.
Keep cables away from those with high voltages or heavy currents.
Do not allow the device or cables to be exposed to water.
z Doing so may result in electric shock, fire or failure of non-waterproof devices or cables.
If the device fails or is exposed to water (non-waterproof devices or parts), or an
unusual smell, smoke, or sparks are detected, immediately refrain from using the
device and contact OMRON or a sales representative for service and repair.
z Continued use of the failed device may result in electric shock or fire.
Do not use damaged cables.
z Continued use of the damaged cables may result in electric shock or fire.