Filter
Top Products
5. Accessories
6. Specifications
PH-2720-PA pH/ORP Preamplifier
Housing material: CPVC
Compatible sensors: PHE-3271 Flat Surface pH Electrode
PHE-2716 Bulb pH Electrode
ORE-2715 Flat Surface ORP Electrode
ORE-2717 Bulb ORP Electrode
Input Impedance: >10
11
Ω
Operating temp.: 0 to 80 °C
Gain: X1 (unity)
Input power: ±4.5 to ±8 VDC, dual supply
Current consumption: <1 mA, dual supply
Quality standard: CE
Dimensions:
PHE Series pH Electrodes - ORE Series ORP Electrodes
General Specifications
Wetted parts:
Sensor body: CPVC
O-rings: Viton®
Electrode junction: Porous UHMW polyethylene
Quality standard: CE
Maximum pressure/temperature ratings:
• 7 bar (100 psi) max. @ ≤65 °C (149 °F)
• 4 bar (58 psi) max. @ ≤85 °C (185 °F)
503
PSI
BAR
50
75
25
122
167
77
25
2
75
5
1007
100
212
°F
°C
SAFETY INSTRUCTIONS FOR IN-LINE ELEC-
TRODE INSTALLATION
1. Do not remove from pressurized lines.
2. Do not exceed maximum temperature/pressure
specifications.
3. Do not install/service without following
installation instructions (see sensor manual).
4. Wear safety goggles and faceshield during
installation/service.
5. Do not alter product construction.
6. Failure to follow safety instructions could result
in severe personal injury!
CAUTION!
When replacing O-rings, apply O-ring lubricant to sensor O-rings
prior to preamplifier/electrode assembly. Unlubricated O-rings
may score the preamplifier sealing surface.
7. Preamplifier Troubleshooting
Procedure:
A. Install sensor adapter into preamplifier
B. With preamplifier and instrument connected, simulate pH 4, 7, and
10 and record displayed mV readings (right) and approximate
preamplifier response time between simulations.
C. Refer to table on next page for preamplifier troubleshooting tips.
Viton®
EPR
Kalrez
PP
Material
FPP-1220-0021
FPP-1224-0021
FPP-1228-0021
PH-31542-TC
Part no.
Sensor
cap
Description
Sensor O-ring,
2 required
3.6 in./
91 mm
1.8 in./
46 mm
3/4 in. NPT
female threads
Std.15 ft/
4.6 m cable
Simulator Actual displayed
Input mV
4.00, +177 mV ________________________
7.00, 0 mV ________________________
10.00, -177 mV ________________________
Pream
p
lfier res
p
onse time: ________________________