Filter
Top Products
2
Corner Mounting
The wall brackets have an angle designed for mounting the
speakers across a 90° inside corner. This is very useful within an
enclosed patio area or angling the speakers into a room, fig. 3.
Optional Omni Mount (not included)
The top of each speaker cabinet has a pair of inset screws
designed for use with the Omni Mount 20.5 ball mount. This is
useful for mounting the speakers vertically rather than
horizontally. The mount consists of two pieces. One that screws
to the speaker enclosure and one that is mounted on the wall.
The wall mount has a two-piece mechanism that tightens around
a ball on the end of the speaker mount. This allows the speaker
to be placed at the appropriate angle and tightened holding its
placement, fig. 4.
Fig. 3
Fig. 4
Fig. 5
Making the Connection
Positive and negative spring loaded connection terminals are
located on the back of each speaker. Note that the stereo
speakers have two pairs of terminals to accept both left and right
signals. The terminals are color coded red for the positive signal
and black for the negative signal, fig 5. For this purpose, many
pairs of speaker wires utilize red and black shielding for easily
identifying the positive and negative leads. Other speaker wires
use a copper wire for positive and white tinted copper wire for
negative.
Once the installation is complete, your speakers should be fully
operational. Should you have no audio from the speakers, make
sure the speaker wires did not become disconnected from the
terminal posts, or that there is not a short in the speaker wire.
- Signal + Signal
6-1/2" 2-Way 8 ohms
Indoor/Outdoor Speaker
Made in China
www.nuvotechnologies.com
AccentPLUS1
Model: NV-AP16OW
Serial: AP14506-321
NuVo Technologies LLC H ebron , Kentuc ky USA