Filter
Top Products
20
Simplese D Specifications
Zones 1-4 Power Amplifier Outputs System
Continuous Average Output Power 30W (15W x 2) System On 5V @ 50mA
Two channels driven 30-20kHz @1% THD External Mute 3-12V DC
Rated Distortion (1/2 power) 0.40%
Rated Impedance 6 Ohms Power Requirements
Damping Factor 50+ Power Supply 90-260VAC 50/60Hz
Frequency Response (20-20kHz) +2dB Power Consumption all channels 140W
driven to full-rated power
Preamplifier Section Power Consumption average 30W
Variable output 0-600mV operating conditions
Fixed output 600mV Power Consumption no signal Less than10W
Impedance 600 Ohms
Physical Specifications
Source Inputs 1-4 Unit Size Millimeters 44H x 430W x 270D
input Impedance 10K Unit Size Inches 1.75H x 17W x 10.625D
Input Sensitivity for rated power 300mV RMS Unit Weight Kilograms 2.95
Input Overload 3V RMS Unit Weight Pounds 6.5
Emitter Outputs NuVo reserves the right to change specifications
Source Outputs 4 without notice.
Output Drive Current 100mA
Output Drive Voltage 5V
Source 1&2 38kHz/56kHz Selectable
Source 3&4 38kHz
Compatible with single and dual emitters