Filter
Top Products
CDN 36
BEFORE SWITCHING OFF THE POWER
When you have finished using the CD player, be sure that the disc tray is closed with the “OPEN/CLOSE” button before
switching off the power.
DO NOT switch off the power when
the disc holder is open.
Switch off the power after the
disc holder has been closed
with the “OPEN/CLOSE” button
TROUBLESHOOTING
Symptom Possible Cause Corrective Action
The power fails to switch on when
the POWER switch is set to on
Poor power plug connection at the
AC outlet or IEC Power cord loose
from rear of unit
Insert the power plug firmly into
the AC outlet and make sure
connection is good in unit rear
Disc play does not start The disc is loaded upside down
The disc is too dirty
Reload the disc with the label side
up
Clean the disc
No sound Improper output cable
connections
Improper amplifier operation
Connect the output cables
correctly
Check amplifier setup
Sound skips
The CD player is subject to
vibrations or physical shock
The disc is too dirty
Change the installation location
Clean the disc
Hum
Loose cable connections Firmly connect all audio plugs
- The Leader in DJ Technology
©2002 Numark Industries - 18 - http://www.numark.com